WEP 948D III Upgraded 2-IN-1 ESD Safe Soldering Desoldering Station with Fast-Heating Desoldering Gun & Soldering Iron, Sleep Mode, Automatic Shutdown, Temperature Calibration with 31 Pcs Accessories
- Desoldering: The ALL-NEW & improved desoldering station provides a significantly faster through-hole component desoldering experience without any jam. This desoldering tool is especially suitable for frequent through-hole desoldering work for in-line sockets, LCD displays, LED Nixie tubes, and more
- Soldering: The soldering station's 110W heating element can heat up fast during use. Temperature is adjustable from 392~896°F. When heating, the built-in PID program will detect and compensate for the temperature loss every 20 milliseconds to achieve fast temperature recovery. This soldering iron station can apply to most soldering situations, even for larger solder joints
- 2-IN-1: This multi-station allows you to use a soldering station and desoldering station at the same time. When the solder joints require slightly more heat, you can use the soldering iron and desoldering gun together to heat up the solder joint fully before extracting the melted solder with the desoldering tool
- Complete set of accessories: The package includes 3 interchangeable soldering sucker nozzles (1.0mm/1.2mm/2.0mm), 3 soldering tips (Type-I/B/K), 100% metallic soldering & desoldering holder, 5 ceramic filters, 10 filtration adsorbers, a set of cleaning pins, a solder residue storage chamber, a vacuum receptacle cover, 2 solder residue filter spring
- This 2 IN 1 soldering and desoldering tool is covered by our exclusive 1-year USA technical support, with 24-hour assistance from our dedicated team. Note: This product is rated for 110-127V USA specifications. Do not connect this iron to a 220V power socket
Estimated shipping
Select a product to estimate shipping.WEP introduces 948D-III 2-in-1 Station with multiple functions to satisfy your soldering and desoldering needs in one station!
Upgraded Desoldering Station
Quicker heating
Desolder without jam
Desolder large components
Soldering Station
High Power Rate: 110W
Suitable for through-hole components with multiple pins or leads
Temperature Range: 392~896°F
2-IN-1
Individual Switches: Turn on individually or together
Indicator for PID program
Soldering& Desoldering holder
Sleep Mode
Press and hold the "MENU" button for about 2 seconds to enter the settings page. "L10 L10" means the sleep mode was ON and the sleep countdown is 10 mins. Activates when non-use for longer than 10 minutes is detected, cooling the soldering iron’s temperature to 392°F, the station enters sleep mode.
Auto Shut-down
If the station is continuously not woken in another 30 minutes under sleep mode, it will automatically shut off (takes 40mins totally). To restart the soldering station, please turn ON the power switch.
NOTE: Automatic shutdown is only effective when the station is turned on for sleep mode.
°F/°C Conversion
Press and hold the “MENU” button for about 2 seconds, enter the settings page, and change the oC/°F display to adapt to different usage situations.
Digital Temperature Calibration
Once the station’s temperature has stabilized, press and hold both the soldering station's (or the desoldering station's) temperature increase and decrease buttons for approximately 2 seconds. The display will show “CAL” and the set temperature value. Enter the actual measured temperature and the station automatically calibrates.
902 Series Soldering Iron Tips
902-I
902-B
902-K
902-3.2D
Interchangeable Desoldering Nozzles
0.8 mm
1.0 mm
1.2 mm
2.0 mm
Compact Desoldering Soldering Holder
Soldering& Desoldering 2-IN-1
Heat-resistant
100% Metallic -Hold securely
Desoldering Gun Accessories
5 x ceramic filters
10 x filtration adsorbers
2 x solder residue storage chamber
2 x vacuum receptacle cover
Specifications
Product details
Especificacions
| Main Specification | |
|---|---|
| Components inclosos | WEP 948D III Desoldering Station & Soldering Station, 3 interchangeable soldering sucker nozzles (1.0mm/1.2mm/2.0mm), 3 soldering tips (Type-I/B/K), a 100% metallic soldering & desoldering holder, 5 ceramic filters, 10 filtration adsorbers, a set of cleaning pins, a solder residue storage chamber, a vacuum receptacle cover, 2 solder residue filter spring |
| Fabricant | Guangzhou Yihua Electronic equiper Co. |
| Comptador d' unitats | 1 Compte |
| Marca | WEP |
| Nombre d' elements | 1 |
| Dimensions del producte | 9.76"D x 5.9"W x 4.96"H |
| Voltage | 110 volts de final actual |
| WattageCity name (optional, probably does not need a translation) | 290 Watts |
| Puntuació superior de la temperatura | 896 °F |
| Pes de l' element | 3, 2 kg |
| Product information | |
|---|---|
| Puntuació de la temperatura inferior | 392 °F |
| Nombre de canals | 1 |
| Nombre de paquets | 1 |
| Technical Details | |
|---|---|
| Número de part del fabricant | WEP 948D-III |
| Funcionalitat de temperatura | Exhibits excellent temperature stability over a wide range of temperatures |
| Item details | |
|---|---|
| Número de model | 948D-III |
| Nom del tipus d' element | Soldering Stations |
| Measurements | |
|---|---|
| Dimensions de l' element D x W x H | 9.76"D x 5.9"W x 4.96"H |
| Altres | |
|---|---|
| Tipus de producte | Estacions solides |
| Visualització | LCDName |
| Etiquetes | |
|---|---|
| Etiquetes | |