Vessel Electric Ball Grip
- Equipped with 3 rotational and torque modes in one body. Can be used for different purposes
- Low: 280 rpm / 1.2 Nm (Medium) 340 rpm / min / 1.6 Nm (High) 400 rpm / 2.0 Nm (Maximum Endurance Torque when Hand Cranking: 12 Nm)
- Grip length: 5.8 inches (147 mm); Grip diameter: 1.8 inches (45 mm); Weight: 6.7 oz (170 g); Sleeve: 0.2 inches (6.35 mm); Aluminum sleeve chuck
- Charging Time: Approx. 60 min. Number of charges: Approx. 500 times. Charging Method: USB-type C charging
- Accessories: 1 bit: (+) 0.08 x 3.9 inches (2 x 100 mm) USB charging cable (3.3 ft (1 m)
- Country of Origin: Japan
- Tightening or tightening required by manual may lead to failure
- Please use the included charging cable when charging
- 3 levels of rotation and torque can be switched to suit your needs. ● Reinforced gear & housing for 20% more strength The charging port uses a USB Type-C that allows you to connect without any directions of the terminal. Can be attached to a drop prevention cord
- Caution: Please read the instruction manual (English language not guaranteed). Please be careful of short circuits and electric shocks. Overload may cause damage or injury to the screw. ● Keep your children with care at home
Estimated shipping
Select a product to estimate shipping.Equipped with 3 rotation/torque modes in one body.
Can be attached to a drop prevention cord (sold separately).
Ball Grip Electric Screwdriver
It can be used as a manual screwdriver when tightening the motor, and when tightening the book.
The grip is a familiar ball grip and a replaceable tip bit.
Can be operated by a switch.
LED light included. Easy to charge via USB port. Battery charging lamp included.
For electrical and equipment work, board assembly, equipment and equipment maintenance, automobiles and two-wheel maintenance, and DIY.
Not compatible with USB Type-C to Type-C cables. Charging may not be possible except for the included USB cable. Please use the included charging cable to charge.
Please use AC adapter (DC5V). Charging may not be possible depending on the type. In addition, this product is not compatible with rapid chargers (high wattage).
Important information
Safety Information
Caution: Please read the instruction manual (English language not guaranteed). Please be careful of short circuits and electric shocks. Overload may cause damage or injury to the screw. ● Keep your children with care at home
Especificacions
| Main Specification | |
|---|---|
| Ús recomanat per al producte | For heavy-duty screw tightening, electrical terminal block work, and long tightening of power distribution boards |
| Components inclosos | Manual d' instrucció, Bits: 1 (+2 x 100 mm), USB charging cable (3.3 ft / 1 m) |
| Fabricant | VESSEL |
| Comptador d' unitats | 1 Compte |
| Estil del cap | Phillips |
| Marca | Vessel |
| Nombre d' elements | 1 |
| Color | Negre |
| Número d' identificació global de comerç | 04907587029904 |
| Funcionalitat especial | 3 Stage Switching Mode for Rotations and Torque |
| Pes de l' element | 170 g |
| Product information | |
|---|---|
| Nombre de paquets | 1 |
| Technical Details | |
|---|---|
| Tipus de material | Nylon with fiberglass, Special alloy steel |
| Número de part del fabricant | 220USB-P1 |
| Mida del capçal | +(2 x 100mm) |
| Item details | |
|---|---|
| Número de model | 220USB-P1 |
| Nom del tipus d' element | Electric Drill Screwdriver |
| Measurements | |
|---|---|
| Dimensions de l' element | 5.79 x 1.77 x 1.77 inches |
| Altres | |
|---|---|
| Tipus de producte | Electric Drill Screwdriver |
| Etiquetes | |
|---|---|
| Etiquetes | |