MIBRO Circle Hole Cutter

This Circle Hole Cutter from MIBRO- a 60 plus year old company selected as one of Canada's " 50 Best Managed Companies" will cut a hole from 1 to 6 -Inch in diameter. For use with a drill press the cutter will cut a inside or outside circle with its reversible blade. This cutter is designed for wood or plastic only.

MIBRO Adjustable Circle Hole Cutter (460271)

MIBRO

Trusted Quality Since 1946.

For more than 70 years, The MIBRO Group has been a major supplier of quality hardware products for the Do-It-Yourself and Industrial markets across North America.

MIBRO is a recognized leader of branded and private label programs in three specific categories: Power Tool Accessories (MIBRO & MIBRO Industrial), Chain, Rope and Accessories (KingChain & KingCord), and specialty clamping and woodworking products under our wolfcraft brand.

Adjustable Circle Hole Cutter

Clean, Smooth & Concentric Holes

MIBRO's Adjustable Circle Hole Cutter works just like an adjustable hole saw.

Use for cutting clean holes or making wheels from wood, composites, plastics, and soft metals, like sheet metal, brass, copper and aluminum.

Cuts holes and wheels from 1 inch to 6 inches in diameter.

Ideal tool for making clock faces, toy wheels, birdhouses and other projects - Great for woodworkers, model builders, hobbyists and clock makers.

Use to cut holes into or wheels from lots of materials

Cuts holes from 1 inch to 6 inches in diameter

Use in all woods, wood composites, plastics and soft metals

Tempered steel body for a long service life

Reversible, double-ended High Speed Steel cutting blade

For use in a drill press only - 500 RPM Max

1/2" hexagonal shank for a secure grip in the drill press's chuck

All diameter adjustments are made with the included hex wrench

How to Use - A Step-by-Step Guide

Step #1 - Determine Size & Orientation

Identify the hole size that you need to create.

Adjust the cutting blade based on whether you are cutting a hole into your material or a wheel out of your material (see below).

Step #2 - Measure & Mark

Firmly affix the tool into your drill press.

Mark the center point of your hole with a pencil.

From the center point, use a ruler to mark the radius of the hole.

Step #3 - Adjust Cutter

Ensure the pilot drill in the tool lines up to the center point of your hole.

Using the included hex key, slide the tool's arm in or out to line up with the outside radius point that you've just marked.

Step #4 - Work-Piece Setup - Table

Make sure your work-piece is properly clamped in place.

Use scrap material (wood or plastic) underneath the work-piece so that the cutter can cut clean through - 1/2 inch thickness is recommended.

Step #4 - Work-Piece Setup - Rails

You can also use scrap 'rails' to keep the work-piece raised up from the drill press's base to achieve the same result.

Note, there may be more splintered 'break through' using this method.

Step #5 - Final Setup

With your drill press unplugged, make sure the RPMs are set to 500 Maximum. Use lower speeds for harder materials.

Make sure you have the proper guards in place and that you are wearing appropriate personal safety gear.

Step #6 - Cut the Hole!

With the drill press running, apply moderate, consistent pressure to the work-piece and let the cutter do its work!

Step #7 - Sand & Finish!

If required, sand the inside edges of the hole for a perfectly smooth finish.

Are You Cutting a Hole or Cutting a Wheel?

For cutting a hole into material

Note the straight, smooth inside wall of the hole.

Note the orientation of the cutting blade and the curved edge of the removed material.

For cutting a wheel out of material

Note the curved edge of the hole in the board.

Note the orientation of the cutting blade and the straight, smooth walls of the removed wheel.

Product details

Main Specification
Material compatible	Plàstic, Fusta
Color	Negre, plata
Fabricant	The Mibro Group
Marca	Mibro
UPC	066366460278
Número d' identificació global de comerç	00066366460278

Technical Details
Número de " part "	460271
Model	460271
Tipus de material	Alta velocitat Steel

Altres
Tipus de producte	Hole Saws
Dimensions de l' element L x W	8.6"L x 5.7"W

MIBRO 460271 Adjustable Circle Hole Cutter

$ 25,56 25.56 USD $ 25,56

Not Available For Sale

Compartir

Estimated shipping