10G PCIe Network Card - Single Port 10 Gigabit Ethernet Adapter PCIe 4.0 x1 RJ45 Multi-Gigabit 10/5/2.5/1Gbps for Servers PCs Windows Linux Realtek RTL8127
- RUNS IN A PCIe x1 SLOT, MOST 10G CARDS NEED x4 OR x8 - Uses one PCIe 4.0 lane at 16 GT/s, so it fits the short x1 slot on your board and leaves x16 free for a GPU. Also seats in x4, x8, x16.
- 10 GIGABIT OVER COPPER, SIX SPEEDS, 100 METRES - Realtek RTL8127 auto-negotiates 10G, 5G, 2.5G, 1G, 100M and 10M. IEEE 802.3an and NBASE-T compliant. Use Cat 6a cable for 10G at 100m.
- INSTALL THE DRIVER FIRST, ORANGE LED CONFIRMS 10G - Windows 11 and 10 show 1Gbps until the Realtek 10G driver is installed. Green LED for activity, orange only on a live 10G link.
- FOR NAS, HOME LABS, ROUTERS AND VIDEO EDITING - Moves a 50GB project in about a minute. Linux 6.16+ built in, FreeBSD driver available. PXE boot, 16K jumbo frames, 802.1Q and 802.1ad VLAN.
- BOTH BRACKETS INCLUDED, FULL-HEIGHT AND LOW-PROFILE - Fits ATX towers and 1U, 2U and SFF chassis with no extra purchase. Under 4W, fanless, IEEE 802.3az. Rated 5C to 50C for 24/7 use.
Estimated shipping
Select a product to estimate shipping.WHO THIS 10 GIGABIT ETHERNET CARD IS FOR If your storage is faster than your network, this expansion card closes the gap. A single gigabit port tops out near 110 MB/s in practice, slower than almost any SSD, which is why a large backup or an uncompressed video file still takes ten minutes to cross a room. This 10GBASE-T network interface card gives a desktop, tower server, workstation or DIY storage box a 10 gigabit copper connection over the twisted-pair cabling already in the wall. TYPICAL USES Editing 4K and 8K footage straight off shared storage instead of copying it locally first. Nightly whole-machine and Time Machine style backups that finish before morning. Migrating virtual machines between hosts. Serving a large media library to several viewers at once. Pulling multi-camera surveillance streams into an NVR. Direct-attaching two machines with a single cable when there is no switch in between. SMB multichannel, iSCSI and NFS shares all benefit from the extra headroom. WHAT YOU NEED AT THE OTHER END A 10 gigabit or multi-gig switch, or a second 10 gigabit adapter for a point-to-point link. Category 6a cable is specified for a 10 gigabit link at the full 100 metre reach; Category 5e and Category 6 still carry the 5G, 2.5G and gigabit modes over that distance, and shorter Cat 6 runs often negotiate 10G as well. The port drops back automatically, so nothing breaks if one end is slower. SLOT AND PLATFORM NOTES The adapter needs a PCIe Gen 4 x1 slot, or any x4, x8 or x16 slot. Seated in an older PCIe 3.0 x1 slot the single lane becomes the limit and throughput settles around 7 to 8 Gbps. On some boards the short slots run through the chipset rather than the CPU, which can also cap the negotiated speed. Jumbo frames up to 16 Kbytes, an MTU of 9000, VLAN tagging, flow control, Wake-on-LAN and network boot are all supported. IN THE BOX Network card with heatsink fitted, plus a spare low-profile bracket for slim and rackmount cases.
Specifications
| Main Specification | |
|---|---|
| Compatible Devices | Desktop, Router, Server, Workstation, Network Attached Storage (NAS) |
| Manufacturer | BZIZU |
| Item dimensions L x W x H | 7L x 2W x 8H Centimeters |
| Brand | BZIZU |
| Number of Items | 1 |
| Product Dimensions | 7L x 2W x 8H Centimeters |
| Colour | RJ45 |
| Product information | |
|---|---|
| Number of Packs | 1 |
| Hardware Interface | PCI Express x1 |
| Technical Details | |
|---|---|
| Data Transfer Rate | 10000 Megabits Per Second |
| Country of Origin | China |
| Item details | |
|---|---|
| Model Number | TXA401 |
| Others | |
|---|---|
| Box Contents | 1 x Low-Profile Bracket, 1 x Network card |
| Data Link Protocol | Ethernet, Gigabit Ethernet, Fast Ethernet |
| Compatible Operating System Family | Linux, Windows |
| Product Type | Network Interface Cards |
| Tags | |
|---|---|
| Tags | |