Ortis Automatic Vacuum Switch for Power Tools, with Smart Current Sensing & Delayed Start to Prevent Circuit Overload, Avoids Breaker Tripping, Plug & Play Dust Control Solution LF40
- Unique Current Sensing Technology: If the tool motor connected to the "A" port exceeds 30W, the vacuum connected to the "B" port will automatically turn on with a 1-second delay. This helps prevent circuit overload caused by both the tool and vacuum starting at the same time.
- Work More Efficiently: When you start your tool, the vacuum automatically turns on after a 1-second delay. Once you finish, it remains on for an additional 7 seconds to clean the inlet tube. This saves time and electricity while reducing airborne toxins and work-area noise—both of which can contribute to health issues.
- Suitable for Most Medium-Duty Workloads: The Etoolcity automatic vacuum switch has a start-up threshold of about 0.25 amps (30W at 120V or 60W at 220V), making it ideal for medium-duty tools like most miter saws, table saws, power sanders, and routers. It also helps extend the life of your vacuum.
- Greater Safety: Built with a high-cost, UL-certified 14AWG American standard power cord that allows over 30A of current, the Etoolcity switch operates stably up to 3600W. The housing is made of PC+ABS V0-grade flame-retardant material, offering enhanced reliability and safety.
- Two Installation Methods: You can either mount the power module using screws or attach it directly to the wall with the included strong, nano-markless adhesive hook. Both options offer a secure and durable installation.
Estimated shipping
Select a product to estimate shipping.Why You Need a Automatic Vacuum Switch
It eliminates the distraction of reaching for a vacuum while working with potentially dangerous power tools.
It ensures that dust and debris are collected as you cut, as opposed to being cleaned up with greater difficulty after the mess has been made.
It minimizes hazardous airborne dust which can lead to a variety of ailments.
Retaining the proven reliability of our Ortis technology, the automatic dust controller switch is the latest Version of the Ortis Vacuum Autoswitch -an essential device in workshops and on job sites for more than a decade.
THE NEW ORTIS AUTOSWITCH FEATURES
New Current Sensing Technology and Actuation Threshold
Supports a Wide Range of Cutting Tools from Rotary Handheld Devices to Large Shop Saws
Prevents Circuit Overload with an Auto Turn-On Vacuum Delay
Runs the Vacuum Only While You’re Using Your Tool So You Save Time and Electricity
Automatically Delays Vacuum Turn-Off by 7 Seconds to Continue to Clear the Air While the Motor Spins Down
Helps to Comply with OSHA Requirements for Dust Control
Highlights of the Ortis Autoswitch:
STARTUP DELAY- Controls in-rush current to help avoid circuit overload
AUTO MODE- Turns the vacuum on automatically with the power tool
SHUTOFF DELAY- Allows time for the vacuum to clear the hose of debris
POWER TOOL OUTLET
Tool Outlet Connection: 2 or 3 prong plug
Max. motor rating should not exceed 120V/15A or 220V/10A, 50/60Hz, 1875W
ACCESSORY OUTLET
Any standard shop type vacuum will run on the Ortis Autoswitch
Vacuum motor HP should not exceed 1875W
Dust collector motor should be rated at 120V/15A or 220V/10A and HP should not exceed 1875W
Power Feeders can also be controlled
Focus On Your Work:
Save time
Minimize airborne dust Reduce
Cleanup
ELECTRICAL SPECIFICATIONS Outlet Required:
Standard 120V/15A or 220V/10A,50/60Hz Outlet
Input Connection: 3prong(grounded)male
'A' Port Power Rating: 120V/15A or 220V/10A,50/60Hz
'B' Port Power Rating: 120V/15A or 220V/10A,50/60Hz
Actuation Threshold: ~0.25 Amps(about 30W at 120V)
P ackage Included:
1x Automatic vacuum switch with 15'' power cord
2x Mounting screws
1x Installation instruction
1x Strong nano-markless hook sticker
Product details
Specifications
| Main Specification | |
|---|---|
| Manufacturer | ortis |
| Brand | Ortis |
| Item Package Quantity | 1 |
| Included Components | 1 |
| Power Source | Ac |
| Colour | yellow |
| Item Weight | 10.5 ounces |
| Product information | |
|---|---|
| Package Dimensions | 6.69 x 3.5 x 2.24 inches |
| Item model number | ETC-098 |
| Others | |
|---|---|
| Date First Available | 2025, April 2 |
| Product Type | Vacuum & Dust Collector Parts |
| Tags | |
|---|---|
| Tags | |