Network Cable Tester and Tracker, KOLSOL AT278 NF-8601S TDR Multifunction LCD LAN Ethernet Poe Cable Tester for RJ45/RJ11/BNC/Metal Cable - PING/POE Wire Tracker for Length & Distance to Fault Testing
- [Anti-interference network cable tester] AT278 Network Cable Tester adopts advanced LCD display design, and displays the location of the fault through the intuitive graphical interface of the intelligent wiring diagram. And use the latest TDR technology and complete AC Interference Rejection, much easier than other tracers on markets. Widely used in engineering wiring, network and equipment maintenance
- [Portable & Rechargeable Design] This Poe Cable Tester has an ergonomic handheld design and is equipped with a carry case, so you can easily attach the device to your waist or put it in your bag for easy portability. Rechargeable design, built-in 1800mah 3.7V lithium battery, no need to buy or replace the battery, running time 10 hours, very suitable for the needs of continuity testing
- [Multifunctional Design] This Toner Ethernet Cable Tester integrates Continuity testing, cable scan, port flash, length measurement, POE Power Supply Test, QC testing and NVC function in one device. Realize one machine with multiple functions and flexible use to meet your testing needs. A must-have tool for modern web technicians and DIY enthusiasts
- [Cable Continuity Testing] Connect the network cable to be tested to the transmitter, and the wire tracker will automatically detect the status of short circuit, crossover and open circuit of the network cable, and the status is displayed through the intelligent wiring diagram, which facilitates the accurate positioning of lines and ports
- [POE & PING Test] Support to identify PoE presence and detect how much voltage there is. PING: Test network performance, packets, min and max time
- [Length Measurement & Fault Distance Measurement] Our Network Cable Tester utilises TDR theory to accurately measure cable length with visual length graphics and provide distance to fault information. Display graphical wire mapping, opens, shorts. Dynamically calibrate the cable length, using new measurement technology, the measurement accuracy is as high as 98%
- [Aditional Highlights] Come with TF card included to export data to PC; Voltage detector: included in receiver (90-1000V); Low voltge alarm function and automatic delay power on-off. Big LCD color screen 320*240 and lighting lamp in darkness. Hub blink to locate network port by the flashing port light on a server/switch/hub/router port
Estimated shipping
Select a product to estimate shipping.TDR Multi-functional Network Cable Tester
AT278 Network Cable Tester provides full cable testing on different category network, coax, or telephone cable, displaying wire map and any faults.The intelligent wiremap' feature tests for length, shorts, split pairs, or opens and displays with an intuitive graphical interface where a fault is located.(usingTDR techonology:Time Domain Reflectometry).Besides, finding cables easier and tracing with AC fliter, or locating network port using hub blink feature. AT278 also tests the presence of PoE and PING functions.
POE TEST
Test the voltage and current between the power adapter and the powered device, and calculate the power consumed by the powered device
NCV FUNCTION
One-click identification of live equipment can detect wires and sockets to avoid the danger caused by strong electricity during construction
LENGTH MEASUREMENT
Use TDR techonology for cable length test. The network cable tester measures cable length and identifies the distance of open circuits and short circuits. Dynamically calibrates cable length and make length measurement as accurate as 98%.
PORT FLASH
Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M Hub/switch.
PING TEST
To test network performance, data packet, min & max time
LED lIGHTING
LED lights can be used at night or in dark environments to meet your testing needs in various environments
AT278 LCD Network Cable Tracker Functions
1. Measures cable length and display the distance to fault.
2. PoE Presence: identify which pins are providing power and detect how much voltage .
3. PING function to test network performance, data packet, min & max time.
4.Tone trace cable with complete AC Interference Rejection, much easier than other tracers on markets.
5. Hub blink for locating network port by the flashing port light on a server/switch/hub/router port
6. Core troubleshooting features; length, distance to fault, graphical wire mapping, opens, shorts
7. TF card included to import and export data from comupter (50 sets, txt format).
8. Roughly locate breakage or short position by tone.
9. Voltage detector: included in receiver (90-1000V)
Warm Tips(pls kindly notice this. )
this device works by TDR theory, which is mainly to test long cables.
If cable is <20m, it will display cable is too short or open.
Thus, when measure length, pls try a long cable, for other functions, short cables are acceptable.
Product details
Specifications
| Main Specification | |
|---|---|
| Manufacturer | KOLSOL |
| Specification Met | Tdr |
| Brand | KOLSOL |
| UPC | 889327032716 |
| Number of Items | 1 |
| Min. Operating Voltage | 3.3 volts |
| Included Components | Network Cable Tester |
| Power Source | Battery Powered |
| Style | Standard |
| Item Weight | 1.7 Pounds |
| Product information | |
|---|---|
| Number of Packs | 1 |
| Technical Details | |
|---|---|
| Part Number | WIWUAT278-K |
| Model | AT278 |
| Measurement Type | Time Domain Reflectometry (TDR) |
| Style | |
|---|---|
| Style Name | Standard |
| Others | |
|---|---|
| Product Type | Network & Cable Testers |
| Minimum Operating Voltage | 3.3 volts |
| Tags | |
|---|---|
| Tags | |