OSCARBIDE 1-5/8" x 2" HSS Annular Cutter 3/4" Weldon Shank Mag Drill Bit
- Annular Cutter Size:1-5/8” Cutting Diameter,2 Cutting Depth, 3/4” Weldon Shank with 2 Flat,Pilot Piin Size: 6.34x102mm.
- OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time.
- These HSS Slugger Bit ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.
- OSCARBIDE annular Bit fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders.
- These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel.
Estimated shipping
Select a product to estimate shipping.Features
Annular Cutters cut only the periphery of the hole,ejecting the remaining center as a slug.It produces accurate burr-free holes to close tolerances without pre-drilling or step drilling.
Best used with a drill press or magnetic drilling machine, both for their stability against high torque forces created by such a drill bit and lower RPMs compared to other types of drills. these cutters can be easily used with light duty drilling machines or portable magnetic base drilling machines.
Suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum,copper,and plastic,wood, in either plate.
Annular Cutters can also be best used to make holes in pipes and tubes. Annular cutters help make holes in pipe and tubes without dimpling and deburring.
processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel.
During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.
Insert the ejector pin inside the annular cutter,never use an annular cutter without an ejector pin.
Using lubricant or coolant with any type of annular cutter is a must. A correct lubrication and coolant delivery more life for annular cutters.
HSS annular cutters required Cutting oil, not coolant.
Will this annular cutter fit my magnetic drill press?
Yes – if your magnetic drill press accepts 3/4′′ Weldon shank tooling with 2 flats. This fits most brands including Hougen, Nitto Kohki, Euroboor, Fein, DeWalt, Milwaukee, and generic shop brands. Not for handheld drills.
Can I use this on a standard drill press or handheld drill?
No. Annular cutters are designed for magnetic drill presses only – they require the specific low RPM, high torque, and coolant delivery of a mag drill. Using them on other machines will result in poor performance and potential breakage.
What lubricant should I use?
Cutting oil – NOT coolant. Apply through the arbor slots with the magnet ON and motor OFF. Water-based coolants cause thermal shock and reduce HSS tool life.
How long does the cutter last? Can it be resharpened?
Life depends on material and use – typically hundreds of holes in mild steel. Yes, it is re-sharpenable – grind on a grinding machine until the cutting length is reduced.
My holes are rough or oversized – what could be wrong?
Check: insufficient cutting oil, dull teeth, incorrect speed, loose shank, or debris in the cutter. Also ensure you used a center punch for proper positioning.
Product details
Especificaciones
| Main Specification | |
|---|---|
| Componentes incluidos | 1x Annular Cutter, 1xpilot pin |
| Fabricantes | OSCARBIDE TOOLS |
| Cuenta de unidad | 1 Cuenta |
| Recomendación sobre la superficie | Metal |
| Diámetro de corte | 1-5/8 inches |
| Estilo de punto | Pilot Point |
| Tipo de Shank | Weldon |
| Tipo de fluido de la herramienta | Spiral |
| Marca | OSCARBIDE |
| UPC | 766415074776 |
| Número de piezas | 1 |
| Product information | |
|---|---|
| Número de paquetes | 1 |
| Technical Details | |
|---|---|
| Tipo de material | Acero inoxidable, Acero de aleación, Acero de alta velocidad (HSS) |
| Número de la parte | 1 |
| Modelo | 31045ec0-9b24-4975-910e-073ef42fb955 |
| Número de fluidos | 2 |
| Otros | |
|---|---|
| Tipo de producto | Annular Cutters |
| Tema | 2 Flat | 1-5/8"Cutting Diameter | 2"Cutting Depth | Burr-Free Holes | Rapid Chip Removal | Precision Ground Edges |
| Diámetro mínimo de bore | 1.63 inches |
| Etiquetas | |
|---|---|
| Etiquetas | |