Annular Cutter Set TCT JESTUOUS 3/4 Inch Weldon Shank 1-3/8 Cut Depth 8pcs
- 『Carbide Tips』Tungsten carbide tipped weldon shank annular cutter, 6 carbide tips with silver soldering,the other part are alloy steel,sharper than HSS annular cutters.
- 『Weldon Shank』Applicable to hole cutting and process of annular groove on various magnetic drills and press,can also be used with machine tools such as mills and large drill presses with tool holders.
- 『You Will Get』Includes 6 cutters ( Cutting Diameter:1/2",9/16",11/16",13/16",15/16",1",1-1/16"), 2 pilot pins (6.34x90mm,7.98x90mm) & 1 plastic tool carrying case.
- 『Better Performance』Selected special-purpose carbide tips with multi-cut geometry for ply-cutting and lower friction,reduced damage of tips and improved performance of chips removal.
- 『Widely Usage』Applicable materials include various steel material, steel plate, stainless steel, aluminum, brass, cast iron, etc.
Estimated shipping
Select a product to estimate shipping.CARBIDE ANNULAR CUTTER SET
Tungsten carbide tipped weldon shank annular cutter,6 pices annular cutters and 2 pilot pin.
WHAT IS ANNULAR CUTTER?
Annular cutter (also called as slugger cutter,slugger bits,broach cutter ) is form of core drill used to create holes in metal,annular cutters, named after the annulus shape, cuts only a groove at the periphery of the hole and leaves a solid core or slug at the center.
Annular cutter is a more efficient alternative to spiral drill bits and standard hole saws,annular cutter is similar to a hole saw but differs in geometry and material,an annular cutter cuts only the periphery of a hole, leaving a circular "slug" at the center.
The two most common types are high-speed steel (HSS) annular cutter and tungsten carbide tipped (TCT) annular cutter.
COMPARE WITH HSS ANNULAR CUTTER AND WHY YOU SHOULD CHOOSE TCT ANNULAR CUTTER?
The biggest advantage of TCT annular cutters is speed and ease in which it may cut harder materials,especially for boring larger diameter holes in hard materials, TCT cutters can be used to great success.
The linear speed requirement is higher than that of HSS.
The teeth on TCT annular cutters are harder than HSS, allowing them to cut more difficult materials.
SPECIFICATION
DETAIL
TOOTH
Layered cutting geometry design,ring cutting,reduce power consumption,high efficiency and energysaving.
GROOVE
Large capacity chute,unique spiral groove design,chipping is smooth,easy and quick.
SHANK TYPE
Weldon shank,with more stable clamping for stable cutting and finish of holes,shank diameter 3/4 inch(19.05mm),suitable for 120 degree,three points bolt,fastening for fast loading and unloading chuck bit clamp interface.
APPLICATION
1.The cutting speed:VC=20-25m/min
2.The reasonable rotate feed amount shall be fn=0.08-0.13mm/r.The reasonable feed rate shall be vf=36-60mm/min. "Weldon shank" annular cutters have 2 flats and fix in the chuck by tightening grub screws in the two flat areas.
3.Insert the ejector pin inside the annular cutter.
4.Fill the coolant tank with oil lubrication.
RECOMMEND LIST OF TCT CARBIDE ANNULAR CUTTER
THE DRILLING PROCESS
Fix in the chuck
Start drilling
Add oil lubrication
Fast,sharp and perfect performance of chips removal
REMEMBER:Protect your eyes,and fingers and belongings away from the drilling cutter.
Product details
Especificaciones
| Main Specification | |
|---|---|
| Diámetro de corte | 1/2", 9/16", 11/16", 13/16", 15/16", 1-1/16" inches |
| Material | Acero inoxidable, Acero de aleación, Carbide |
| Fabricantes | Tecnología de tungsteno inc |
| Cuenta de unidad | 1 Cuenta |
| Recomendación sobre la superficie | Metal |
| Tipo de Shank | Weldon |
| Tipo de fluido de la herramienta | Spiral |
| Marca | JESTUOUS |
| UPC | 792966783515 |
| Cortar la cuerda del ángulo | 120 grados |
| Número de piezas | 8 |
| Tipo de acabado | Plata |
| Peso del artículo | 16 onzas |
| Product information | |
|---|---|
| Número de paquetes | 1 |
| Nombre | JESTUOUS Carbide Annular Cutter Set |
| Technical Details | |
|---|---|
| Tipo de material | Acero inoxidable, Acero de aleación, Carbide |
| Número de la parte | JES-CARBIDE-AC-8PCS |
| Modelo | JES-CARBIDE-AC-8PCS |
| Número de fluidos | 2 |
| Style | |
|---|---|
| Tipos de acabado | Plata |
| Otros | |
|---|---|
| Tema | Carbide, 2 flat, with 2 pilot pins, for Drill Press, cutting diameter from 1/2 to 1-1/16 |
| Tipo de producto | Annular Cutters |
| Diámetro mínimo de bore | 0,75 pulgadas |
| Etiquetas | |
|---|---|
| Etiquetas | |