CONFAST 3/16" x 2-3/4" Blue Flat Phillips Concrete Screw Anchor
- BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost
- FLAT PHILLIPS HEAD--Can be driven with Phillips Screw Driver
- SELF-TAPPING-Taps threads directly into masonry and requires no other anchor
- DIAMOND POINT-Easier to drive the screw to save time
Estimated shipping
Select a product to estimate shipping.Applications
The anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Dry environment.
Head Style
The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached.
Hole Diameter/Bit Diameter
The anchor requires a 5/32" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A #2 is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 3/16".
Length Anchor
The length of the anchor is 1-1/4"
Thread Length
The length of the threads on the anchor is 1-1/4" in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 0" to 1/4". This will ensure that the minimum embedment of 1" will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/16" diameter anchor requires the hole in the fixture to be 1/4".
Spacing between Anchors
Each anchor must be spaced a minimum distance of 3" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 2-1/4" from an unsupported edge of the concrete.
Especificaciones
| Main Specification | |
|---|---|
| Fabricantes | CONFAST |
| Cuenta de unidad | Cuenta 100 |
| Tema Dimensiones L x W x H | 1.25 X 0.25 X 1.25 Inches |
| Acabado exterior | Blue Ruspert |
| Tipo de metal | Zinc |
| Estilo de cabeza | Flat Countersunk Phillips |
| Thread Coverage | Fully Threaded |
| Diámetro exterior | 0.19 inches |
| Marca | Confast |
| Tipo de cabeza | Piso |
| UPC | 820274000113 |
| Número de artículos | 100 |
| Fastener Tipo | self-tapping-taps |
| Diámetro del elemento | 0,19 pulgadas |
| Número de piezas | 1 |
| Tamaño fácil | 3/16" |
| Tamaño del pan | 3/16" x 2-3/4" |
| Material | Carbon Steel - Blue Coated |
| Color | BLUE |
| Tipo de pan | Un |
| Sistema de transmisión | JIS |
| Peso del artículo | 16 onzas |
| Product information | |
|---|---|
| Nombre | 100 piezas |
| Technical Details | |
|---|---|
| Número de la parte | CSF316234 |
| Tipo de material | Carbon Steel - Blue Coated |
| Thread Style | Mano derecha |
| Clase de pan | Concrete Screw |
| Diámetro de Groove compatible | 0,14 pulgadas |
| Tipo de pan de tornillo | Unified National |
| Style | |
|---|---|
| Tipos de acabado | Blue Oxide Coated |
| Measurements | |
|---|---|
| Tema Dimensiones | 1.25 x 0.25 x 1.25 inches |
| Otros | |
|---|---|
| Tema | Includes Drill Bit, For Anchoring to Masonry, Block or Brick - 100 per Box |
| Tipo de producto | Concrete Screws |
| Nombre del tamaño | 3/16" x 2-3/4" |
| Estilo de la cabeza del tornillo | Flat Countersunk Phillips |
| Estilo de punto de tornillo | diamond point-easier |
| Etiquetas | |
|---|---|
| Etiquetas | |