5/16"-36 UNEF Thread Tap with 7.3mm Drill Bit
- 【Tap】Length 2.76"/70mm, thread head length 0.87"/22mm.
- 【Drill】Length 4.33"/110mm, 135° split point tip.
- 【Application】Suitable for most metals, copper, alloy steel, cast iron, aluminum, brass, abrasive steel, A3 steel, iron plate ETC.
- 【Usage】Can be used with manual equipment or special processing consoles for tapping, Appropriate addition of coolant can extend the service life when tapping.
- 【Package Included】1pc 5/16"-36 tap, 1pc Φ7.3mm drill.
Estimated shipping
Select a product to estimate shipping.Straight Flute Thread Taps
Material: High-Speed Steel.
Cutting Direction: Right Hand.
Straight flute design, used for through-hole and shallow blind hole tapping, not for blind hole tapping.
Round Thread Dies
Material: Alloy Tool Steel.
Round dies are suitable for general purpose threading, widely used in thread repair or cleaning the external thread.
Tips
Before tapping confirm whether the diameter of the round hole is appropriate, and to take protective measures when working.
When tapping, it is necessary to add water or coolant to cool down to prevent excessive temperature and reduce tap loss. If it encounters difficulty in rotation, the tapping should be suspended.
Be sure to select the appropriate cutting oil for the complex tapping process and apply anti-rust oil for maintenance after use.
Product details
Especificacions
| Main Specification | |
|---|---|
| Recomanació de superfície | Steel, Alloy Steel, Ferro, Alumini, Coure, Valsfrance. kgm, Castella el ferro, Metalls |
| Material | Valsfrance. kgm, Alloy Steel |
| Fabricant | Aceteel |
| Comptador d' unitats | 1 Compte |
| Slit Diametre | 7.3 millimeters |
| Estil del punt | Punt d' divisió |
| Tipus de Shank | Escala |
| Tipus de Flauta d' eina | Espiral |
| Marca | Aceteel |
| Cadena d' angle de retall | 135 graus |
| Nombre de peces | 2 |
| Tipus d' acabat | Valsfrance. kgm |
| Pes de l' element | 0, 27 g |
| Technical Details | |
|---|---|
| Tipus de material | Alloy Steel, Valsfrance. kgm |
| Número de " part " | Tap5/16-36&Drill7.3 |
| Model | Tap5/16-36&Drill7.3 |
| Nombre de Flates | 3 |
| Style | |
|---|---|
| Tipus d' acabat | Valsfrance. kgm |
| Altres | |
|---|---|
| Tipus de producte | Thread Milling Taps |
| Ressaltat de l' element | 5/16" X 36 HSS Machine Thread Tap and Φ 0.28" Straight Handle Twist Drill |
| Mínim Bore Diametre | 7.3 millimeters |
| Etiquetes | |
|---|---|
| Etiquetes | |