S&F STEAD & FAST Annular Cutter with Pilot Pin, 5/8" x 1", Mag Drill Bit
- Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
- HSS annular drill bit with Outside Diameter 5/8 inch with 1 inch cutting depth
- CNC-machined high precision cutter drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
- IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.
- Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.
- Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.
- Compatible with various brands of mag drill including Alfra, BDS, Dewalt, Fein, Euroboor, Hougen, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is not included in this pack.
- Sturdy plastic case holding one annular cutter, one pilot pin
Estimated shipping
Select a product to estimate shipping.The S&F Stead & Fast Annular Cutter is a precision tool designed for creating smooth, clean holes in metal. Built for durability and efficiency, this cutter is ideal for experienced metalworkers and machinists seeking reliable performance.
Key Highlights
- Enhanced Durability: Crafted from M2AL high-speed steel (HSS) for long-lasting use.
- Precise Cutting: Features a CNC-machined cutter with a 3/4" Weldon shank for secure clamping and a refined edge finish.
- Efficient Drilling: Designed for high efficiency and a superior service life, allowing for faster hole creation.
- Smooth Results: Produces burr-free holes with reamed edges, minimizing post-processing.
- Secure Operation: Includes a pilot pin for stable engagement and accurate drilling.
Useful Facts
- Brand: S&F STEAD & FAST
- Model: ZXT-HAZ-007
- Material: High Speed Steel (HSS)
- Shank Type: 3/4" Weldon (with 2 flats)
- Cutting Diameter: 0.63 inches
- Item Weight: 3.2 ounces
Good Fit For
- Magnetic Drill Presses
- Metalworking Projects
- Precision Machining
- Creating Holes in Metal Sheets (up to 1/2” thick)
Product details
Especificacions
| Main Specification | |
|---|---|
| Fabricant | S+FADE & ràpid |
| Comptador d' unitats | 1 Compte |
| Recomanació de superfície | Metall |
| Slit Diametre | 0, 60 polzades |
| Tipus de Shank | Weldoitalyprovince. kgm |
| Tipus de Flauta d' eina | Espiral |
| Marca | S+FADE & ràpid |
| Cadena d' angle de retall | 118 graus |
| Components inclosos | Pilot Pin |
| Pes de l' element | 3, 2 unces |
| Technical Details | |
|---|---|
| Número de " part " | ZXT-HAZ-007 |
| Model | ZXT-HAZ-007 |
| Tipus de material | Alta velocitat Steel (HSS) |
| Nombre de Flates | 5 |
| Style | |
|---|---|
| Tipus d' acabat | Sense codificar |
| Measurements | |
|---|---|
| Dimensions de l' element | 2.44 x 0.63 x 2.44 inches |
| Altres | |
|---|---|
| Ressaltat de l' element | 3/4" Weldon Shank, M2AL HSS Annular Drill Bit for Magnetic Drill Press |
| Tipus de producte | Annular Cutters |
| Etiquetes | |
|---|---|
| Etiquetes | |