MG Chemicals - 4885-454G 63/37 Rosin Core Leaded Solder, 0.032" Diameter, 1 lb Spool,
- Meets J-STD-004 / J-STD-006
- Non-corrosive and electrically non-conductive flux residue
- Standard Flux Core percentage at 2.2 percent
- Melting point 361 degree F
- 63 Percent tin, 37 percent lead, RA flux core
Estimated shipping
Select a product to estimate shipping.M.G. Chemicals rosin activated flux formula is used in our flux-cored solder wire. Its rapid wetting and fast flowing properties results in consistent and reliable soldering every time. Cleaning becomes optional with our RA Flux core because of its non-corrosive and electrically non-conductive properties. Upper temperature limit : Do not to exceed 260 degree C (tip temperature). color and appearance: Amber Solid. Softening Point, degree C (Flux Extract): 80 degree. acid number (mgKOH/g sample): 150-160. silver chromate (qualitative halides): detection. classification per J-STD-004: ROM1. surface insulation resistance: > 1.0 x 109. shelf life: indefinite. residue removal: Not required.
Sn60/Pb40 - Available in No Clean (NC) & Rosin Activated (RA)
It melts at a slightly higher temperature than the Sn63/Pb37 solder, resulting in robust and reliable joints that are highly resistant to whisker formation.
Sn63/Pb37 - Available in No Clean (NC), Rosin Activated (RA) & Water Soluble (WS)
Formulated from a blend of 63% tin and 37% lead, it has the lowest melting point.
Sn60/Pb40
Sn63/Pb37
Rosin Activated (RA)
Made of rosin, extracted from the sap of pine trees, and contains the active ingredient abietic acid.
No Clean (NC)
A mixture of organic resins mixed with certain inorganic agents. It leaves residues behind that do not normally require cleaning.
Water Soluble (WS)
Made from glycol bases, this organic flux is more reactive than rosin activated flux and is thus a stronger cleaner. It leaves a residue behind that requires cleaning with hot water after soldering.
Leaded Solder Wire Selection Chart
Choose Solder Wire by:
- Flux Type.
- Flux Core%.
- Diameter.
- Size.
- Gauge.
- Softening Point.
- Melting Range.
Product details
Especificacions
| Main Specification | |
|---|---|
| Fabricant | MG Chemicals |
| Marca | Mg Chemicals |
| Dimensions del producte | 2.2 x 1.9 x 1.8 inches |
| Pes de l' element | 15, 38 unces |
| Product information | |
|---|---|
| Número de model d' element | 4885-454G |
| Altres | |
|---|---|
| Data Primer disponible | 2010, 14 de març |
| Tipus de producte | Venut |
| Etiquetes | |
|---|---|
| Etiquetes | |