Accusize Industrial Tools Screw Thread Micrometer, 2-3", S916-C752
- Precision Measurement Capability: Offers a fine resolution of 0.001'', ideal for accurately measuring screw threads within a 2-3" range.
- Versatile Anvil Selection: Features a 4-tip anvil set for TPI ranges: 24-14, 13-9, 8-5, and 4.5-3.5, accommodating a wide array of thread sizes.
- Built for Durability: Crafted with precision-ground anvils and components to ensure long-term accuracy and reliable performance.
- Secure and Organized Storage: Includes a fitted box for safe storage and easy transport, protecting the micrometer's precision.
- Essential for Machining Professionals: Perfect for machinists, engineers, and toolmakers who prioritize exact thread measurements for quality results.
Estimated shipping
Select a product to estimate shipping.Accusize Industrial Tools 0-6'' x 0.0001'' Screw Thread Micrometer
Accusize 0-6'' x 0.0001'' Screw Thread Micrometer
There are 6 size ranges: 0-1'', 1-2'', 2-3'', 3-4'', 4-5'' and 5-6''.
Includes 3-5 pcs tip set (number of anvils may vary for different mic sizes).
Both 60 ° V-anvil and conical spindle are hardened and precisely grounded.
Accuracy: ± 0.00016''
Graduation: 0.0001''
Nice plastic fitted case
Usage and Zero Setting
Usage
Mainly used for measuring the diameters of screw thread.
Zero Setting
Before using, wipe off measuring faces of anvils, spindles and calibration standards with a soft cloth or soft paper. Install the anvils in the micrometre and rotate the thimble to the “0” position. Push the anvil sleeve to make the two anvils in contact with each other or make the anvils contact the faces of the calibration standard. Make the line marked “0” on the thimble coincided with the “0” line on the inside sleeve. If the line marked “0” on the thimble does not coincide with the reference line on the sleeve, adjust zero position in the following manners:
Adjust the sleeve with a spanner until the reference line comes exactly in line with the “0” line on the thimble.
Loosen the quick drive, press the thimble to make the “0” line coincides with the reference line on the sleeve.
If necessary, repeat the above procedures.
Anvils
Interchangeable knife-edged (cone) anvil and V-shaped anvil are optional according to the pitch of the measured screw thread.
The pitch of the inch screw thread is the turn number per inch.
The pitch is marked on the anvil.
Reading
Reading is 5.88mm.
Reading is 0.3582''.
Precautions
Do not disassemble and drop the instrument.
Keep the instrument clean and dry.
Regularly inspect the indication to keep precision measuring.
Apply anti-rust oil on the measuring faces and put it back in the packaging box if the micrometre has not been used for a long time.
There are 6 size ranges:
Product details
Especificacions
| Main Specification | |
|---|---|
| Fabricant | Guucra-li Co. |
| Marca | Eines Industrial |
| Quantitat de paquets d' element | 1 |
| Dimensions del producte | 9.84 x 2.36 x 3.15 inches |
| Material | Steel |
| Mida | 2-3" |
| Pes de l' element | 1, 85 lliures |
| Product information | |
|---|---|
| Número de model d' element | S916-C752 |
| Technical Details | |
|---|---|
| Número de " part " | S916-C752 |
| Altres | |
|---|---|
| Data Primer disponible | 2016, agost 23 |
| Tipus de producte | Outside Micrometers |
| Etiquetes | |
|---|---|
| Etiquetes | |