3PLUS HFSNSP 2-in-1 Pneumatic Flooring Nailer/Stapler
- 2 in 1 flooring tool uses 15-1/2 gauge staples and 16 gauge L cleats ranging from 1-1/2" to 2"; When loading L-cleats, insert the nail head into the slot on the magazine
- Interchangeable flooring plates for all sizes of floorings
- Removable long reach handle
- Mallet with white rubber included
- Has pneumatic driving action. Used in hardwood and engineered flooring
Estimated shipping
Select a product to estimate shipping.Each 3PLUS pneumatic tool is thoroughly inspected and tested before leaving the factory. 3PLUS is committed to make your life more convenient and efficient. Whether you are professional contractor or DIYer, if you are looking for a flooring nailer to install your flooring, 3PLUS 2-in-1 Pneumatic Flooring Nailer/Stapler is your best choice. The good quality nailer is easy to use. Buying a 3PLUS air powerd flooring stapler is much more economical than renting another one.
Model: HFSNSP
Our brand: 3 PLUS
Operating air pressure: 60-100 PSI
Load Capacity: 80(Staples) / 100 (L-cleats)
Application: flooring
3PLUS HFSNSP Combination Flooring Nailer & Stapler
This 3PLUS 2-in-1 combination flooring nailer & stapler can drive both staple and L cleat. HFSNSP is a good choice for installation of bamboo, hardwood solid oak and other flooring.
There are two interchangeable flooring plates (3/4" flooring or 1/2" & 3/8" flooring). Please replace the flooring plate before using.
die-casting alumninum body
removable long arm
powerful and durable
compact light wood hammer
Compatible with 16 GA L-Cleats 1-1/2" to 2"
A. Loading the L cleats
1. Hold the tool firmly, press the lock and pull the movable magazine
2. Place the specified type and size of L cleats into the magazine. The head of the L cleats should be inserted into the notch on the fixed magazine
3. Push and lock the movable magazine
Also compatible with 15.5 gauge 1/2" crown staples from 1-1/2" to 2
B. Loading the staples
2. Place the specified type and size of staples in the fixed magazine from upside. Make sure the nail head is inserted into the slot
Operating instruction
1. Test the driving depth in a sample piece of wood before using. If the fasteners are driven too far or not far enough, adjust the regulator to provide less air pressure or more air pressure.
2. Load fastener as described above.
3. Connect the tool with the air supply. Make sure the air pressure is in correct range (60-100 PSI).
4. Hold the long arm and press the shoe to work piece and make sure the correct connection position of fastener. Strike the hammer face with a hammer to drive the fastener out.
Product details
Especificacions
| Main Specification | |
|---|---|
| Material | Alumini, Alloy Steel, Rubber |
| Fabricant | 3PLUS |
| Comptador d' unitats | 1 Compte |
| Marca | 3PLUS |
| UPC | 601116108644 |
| Nombre de ràpidas | 5 |
| Mode d' operació | Automàtic |
| Color | Negre i vermell |
| Estil | Modern |
| Pes de l' element | 3.28 kg |
| Technical Details | |
|---|---|
| Tipus de material | Alloy Steel, Alumini, Rubber |
| Número de part del fabricant | HFSNSP |
| Descripció de la capacitat | 5.9 inch and 16 gauge L nails with a length of 1.5 inches to 2 inches |
| Item details | |
|---|---|
| Número de model | HFSNSP |
| Altres | |
|---|---|
| Tipus de producte | Flooring Nailers |
| Estil del producte | Modern |
| Etiquetes | |
|---|---|
| Etiquetes | |