YUCHENGTECH Edge Bander Banding Machine Portable Edge Banding Machine Curve & Straight Sealing With Adjustable Speed Double-Side Gluing (110V, Adjustable speed)
- Lightweight design :Portable edge bander machine, small size, light weight, can carry edge banding, can also be in desktop. It can be easily carried to the construction site or fixed on a desk for use, solving the issue of large edge banding machines being immobile. Free from time and space constraints, it can be operated anytime, anywhere
- Alien shaped edge sealing : This Woodworking edge bander machine is more for sealing edges of different shapes, finer and shorter edges. Accurately processing complex shapes of wooden boards such as inner arcs (radius ≥ 20mm), outer circles, and chamfers, with an efficiency improvement of 60% compared to traditional linear edge banding machines
- Important parameters : The speed can be adjusted. Edge sealing speed: 5 to 7 m / min; Edge band width: 0.31 to 1.95 inches (8 to 50mm); Edge thickness: 0.031 to 0.039 inches(0.8 to 1mm); Gluing method: double side gluing; Heating time: 5 to 10 minutes; Rubber pot capacity: 1000ml
- Glue and temperature : The heating system of YUCHENGTECH portable edge bander machine is upgraded to make the edge sealing more stronger. Intelligent temperature control system to prevent glue carbonization. Applicable glue: medium temperature hot melt granular glue, applicable temperature: 150°C to 180°C (302°F to 356°F)
- Applications : Sealing large sized boards can be operated by hand, while sealing small-sized boards can be placed on countertops for processing, suitable for different scenarios such as workshops/family workshops. Suitable for all kinds of plates and edge strips, such as: ABS, PVC, particle board, melamine board, fine wood board, MDF, integrated board, acrylic board, etc
Estimated shipping
Select a product to estimate shipping.1. Glue uneven on the banding tape
1.Incomplete melting of hot melt glue. ---Open the melting pot cover to check the hot melt glue.
2.Insufficient glue. --Adjust gluing knob.
3.The bending stripdeformated. --Replace a better edge banding tape.
2. Poor adhesion of the banding tape
1.Non parallel adhesive veneer. --Re-calibratethe support plate(see manual)
2.Heating for a long time, hot melt glue is deteriorated. --Change hot melt glue
3.Hot melt glue temperature is not the correct temperature. --Adjust the temperature.
3. Banding tape is not in level
Twist strake attached starting point/push slower than the speed.
--The support plate should be flush with the workpiece when pressing and fit the starting point, the edge to the workpiece, can not loose.
4. Banding tape is not moving
Wheel or feed wheel skid
--Clean the belt pulley and the feed wheel.
5. The machine is not working.
--The fuse burned out. Wire ends are disconnected. Switch problem, replace the fuse.
--Hot melt adhesive has not dissolved, need to raise the temperature again and start running.
--Power overload, contact the supplier to replace the power supply.
Product details
Especificacions
| Main Specification | |
|---|---|
| Fabricant | FUNENEGEConstellation name (optional) |
| Marca | FUNENEGEConstellation name (optional) |
| Quantitat de paquets d' element | 1 |
| Dimensions del producte | 15.75 x 14.17 x 14.17 inches |
| Voltage | 220 volts de final actual |
| WattageCity name (optional, probably does not need a translation) | 1200 watts |
| Material | Metall |
| Color | Adjustable Speed |
| Mida | 110V |
| Estil | 110V |
| Pes de l' element | 30.8 pounds |
| Product information | |
|---|---|
| Número de model d' element | NNW-634 |
| Technical Details | |
|---|---|
| Número de " part " | NNW-634 |
| Nombre de peces | 1 |
| Altres | |
|---|---|
| Data Primer disponible | 2018, 29 de maig |
| Tipus de producte | Industrial Power Tools |
| Etiquetes | |
|---|---|
| Etiquetes | |