5pcs PCA9685 16 Channel PWM Servo Motor Driver PCA9685 IIC Module 12-Bit, for Robot or for Raspberry pi Shield Module servo Shield
- It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages).
- Communication Interface: IIC, PCA9685 contain an I2C-controlled PWM driver with a built-in clock.
- 6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs.
- 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate.
- 16 Channel PWM/Servo Driver IIC interface-PCA9685 for arduino or Raspberry pi shield module servo shield.
Estimated shipping
Select a product to estimate shipping. Product description
An I2C-controlled PWM driver with a built in clock. That means that, unlike the TLC5940 family, you do not need to continuously send it signal tying up your microcontroller, its completely free running!
Parameter:
Power input terminal
Green power indicator
In the 4 groups of 3-pin connector to facilitate the insertion of 16 servo motor (servo motor plug slightly wider than 0.1 ")
The polarity of the reverse polarity is input on the terminal block Voltage: DC5-10V power supply
Communication Interface: IIC
16-way steering gear control
1.Output enable pin to quickly disable all the outputs
2. Terminal block for power input (or you can use the 0.1" breakouts on the side)
3. Reverse polarity protection on the terminal block input
4. Green power-good LED
5. 3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1" so you can only stack 4 next to each other on 0.1" header
"Chain-able" design.
V + line to place a large capacitor, the maximum external input voltage depends on the 10V 1000uf capacitor
All PWM output lines have a 220 ohm series resistor protection and can easily drive LED
330 ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial.
Solder jumpers for the 6 address select pins.
Package including:
5pcs x PWM Servo Motor Driver
Especificacions
| Main Specification | |
|---|---|
| Dispositius compatibles | Raspry Pi, ArduinoCity name (optional, probably does not need a translation) |
| Fabricant | Aoicrie |
| Marca | AOICRIE |
| UPC | 701715434950 |
| Tecnologia de memòria RAM | DDR3 |
| Tecnologia de connexió | I2C |
| Nom del model | PCA9685 |
| Components inclosos | 5pcs x PWM Servo Motor Driver |
| Model de la CPU | Core i7-10700 |
| Product information | |
|---|---|
| Sistema operatiu | Linux |
| Technical Details | |
|---|---|
| Número de part del fabricant | Aoicrie |
| País de l' origen | EUA |
| Item details | |
|---|---|
| Número de model | Aoicrie |
| Altres | |
|---|---|
| Tipus de producte | Babres |
| Tecnologia de connexió de xarxa | I2C |
| Continguts de les caixes | 5pcs x PWM Servo Motor Driver |
| Compte de processador | 1 |
| Processador Brand | ARM |
| Etiquetes | |
|---|---|
| Etiquetes | |