Gikfun Analog Ceramic Piezo Vibration Sensor Module for Arduino DIY Kit (Case Pack of 5pcs) EK1952
- Based on piezoelectric ceramic chip analog vibration makes use of the anti-transformation process of piezoelectric ceramic making the electric signals vibrate.
- When the piezoelectric ceramic shocking will generate an electrical signal, Controller analog port can be perceived slight vibration signals, Also can be realized with vibration interactions related works, such as electronic drums.
- Different from digital vibration sensor that only accounts times, this analog ceramic piezo vibration sensor module can tell extent of vibration.
- This Ceramic Piezo Vibration Piece Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is proportional with the strength of vibration. So you can know the extent of vibration.
- Please connect analog voltage ceramic vibration sensor to the UNO controller's analog port A0 in accordance with the procedure, then observe the output value of serial port when the vibration degree is different, it can realize interactive works related to the vibration.
Estimated shipping
Select a product to estimate shipping.Technical Parameter:
Working Voltage: 3.3V or 5V
Working Current: <1mA
Operating Temperature Range:-10°C~+70°C
Interface Type: Analog Signal Output
Item Size: 30mm x 23mm
GPIO:
S; signal output,
+; power supply (VCC),
-; ground (GND)
Input: Positive electrode of the piezoelectric ceramic
Gnd: Negative electrode of the piezoelectric ceramic
Features:
1. S-port is connected with the controller's analog input pin.
2. 5V and GND are respectively connected the power supply of + 5V and GND.
3. Input and Gnd are already connected with the piezoelectric ceramics' positive and negative.
Especificacions
| Main Specification | |
|---|---|
| Fabricant | EsohoCity name (optional, probably does not need a translation) |
| Comptador d' unitats | Nombre 5, 0 |
| Marca | Gikfun |
| Nombre d' elements | 5 |
| Voltage | 5 volts |
| Puntuació superior de la temperatura | 70 graus Celsius |
| Color | Blau |
| Tipus de connector | Al llarg del forat |
| Tipus de muntatge | Muntador PCB |
| Nombre de contactes | 2 |
| Longitud de la línia central | 30 Millimetres |
| Technical Details | |
|---|---|
| Número de " part " | EK1952 |
| Tipus de material | Keramiek |
| Nombre de posicions | 3 |
| País de l' origen | EUA |
| Nombre de pols | 2 |
| Item details | |
|---|---|
| Número de model | EK1952 |
| Altres | |
|---|---|
| Tipus de producte | targetes de port USB |
| element Dimensions W x H | 30W x 23H Millimeters |
| Etiquetes | |
|---|---|
| Etiquetes | |