NF8108M Ethernet Cable Tester, Len/Cont w/8Remotes, Cat5/6
- Accurate Measurement: This network cable tester performs continuity testing to help you quickly verify if your cable is functioning properly. It also measures cable length and pinpoints the distance to a break point. Note: Do not connect the remote unit when measuring cable length
- Check Wiring Errors in 5E/6E: The NF8108-M network tester detects open circuits, short circuits, miswires, and reverse connections. If an open circuit is found, the tester displays the specific length range where the issue occurs. Note: The remote unit must not be connected when using pair and length measurement functions
- Calibration Data: This Ethernet tester performs self-checks and automatically compensates for changes in battery level or ambient temperature. It dynamically calibrates cable length measurements, achieving up to 97% accuracy. Compact and lightweight, it is easy to carry and use
- Long Battery Life & 8 Remotes: This portable Cat6 tester features extended battery life of over 50 hours in idle or standby mode. It comes with 8 numbered remote units, allowing you to identify each line and save significant time during testing
- Multi-Cable Testing Capability: Test up to 8 cables simultaneously from one central location using the included remote identifiers, dramatically improving workflow efficiency for installers and technicians without constant swapping
- High Quality: Efficient, powerful, and convenient, you can independently perform continuity checks and wire sequence tests on network cables. The tester indicates the integrity of each wire pair and features an automatic power-off delay for energy saving
- Clear LCD Display: The easy-to-read LCD screen clearly shows wiring status, fault types, and distance information at a glance, making diagnostics quick and straightforward during cable testing operations
Estimated shipping
Select a product to estimate shipping.Since our founding, VXSCAN has been committed to provide the best products, prices and services to the tool market.
We develop tools for you and the market, and then we use and test them over and over to ensure everyone can enjoy our high-quality products.
VXSCAN NF-8108M NETWORK LAN CABLE TESTER WIRE LENGTH TESTER WITH 8 REMOTE UNITS
FEATURES
Measure the length of the network cable and determine the distance to the broken point.
Check for wiring errors in 5E and 6E, such as open circuits, short circuits, jumper wires, and reverse connections.
Eight remote identifiers enable users to test eight cables simultaneously.
The portable unit has a long battery life (up to 50 hours in standby mode).
Automatic time-delay shut-off.
1*NF-8108M Transmitter
8*NF-8108M Remote unit
1* User manual
1*Storage bag
4*AA alkaline battery
Open Circuit in at the near-end plug
"M:" The“3" pin location displays "X",which indicates an open circuit at the near-end plug -“3” pin,and that the open circuit is located close to the near-end plug.
Open Circuit in far-end plug
"R:" line"3" and"6" pins location display "x", this indicates an open circuit in far-end plug "3" and "6" pins, and that the open circuit is located nearby the far-end plug.
8 Remote Units
With 8 RJ45 remote units, it can test up to 8 network cables simultaneously.
If pair and length measurement is conducted in normal conditions, it will display as shown. [Note] : Please do not connect remote units when testing length, and use a network cable with a length of 10m.
If there is unpaired lines in the pair and length measurement, it will display the paired lines first.The last line-78 indicates there is no pair is in lines 7 and 8.
It will display "X" to indicate an open circuit if the length is less than 90% of the other line pair length and the open circuit is located around 89.3m from the tester.
VXSCAN Network Cable Tester——Wiremap Function
If there is any short circuit the cable or terminal, the network cable tester will show you the number of the short circuit line.
"R:"line"3" and"6"pins location display "x",this indicates an open circuit in far-end plug "3" and "6" pins, and that the open circuit is located nearby the far-end plug.
"M:"The“3" pin location displays "X",which indicates an open circuit at the near-end plug -“3” pin,and that the open circuit is located close to the near-end plug.
"|" The“3" pin location displays “X”,which indicates an o pen circuit in the middle of the “3" pin cable.
Product details
Specifications
| Main Specification | |
|---|---|
| Manufacturer | VXSCAN |
| Brand | VXSCAN |
| UPC | 889327157112 |
| Number of Items | 1 |
| Included Components | 1*NF8108-M Transmitter 8*NF8108-M Remote unit |
| Power Source | Battery Powered |
| Style | Compact |
| Item Weight | 0.65 kg |
| Technical Details | |
|---|---|
| Part Number | NF8108-M |
| Model | NF8108-M |
| Style | |
|---|---|
| Style Name | compact |
| Others | |
|---|---|
| Item Highlight | Short, Measures length & break distance for Cat5/6E cables. Detects open, reverse, jumper faults. 8 remotes test 8 cables |
| Product Type | Network & Cable Testers |
| Tags | |
|---|---|
| Tags | |