Ultra-Small RPi GPIO Status LED & Terminal Block Breakout Board Module for Raspberry Pi
- The item has been soldered and assembled. Support for Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, Pi Zero-W, Zero-2W.
- GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs green. The position of the LED is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, and the logic level of the GPIO can be observed very quickly and intuitively. The driving current of each LED is only 0.1mA, so you don't have to worry about it affecting the read and write status of GPIO.
- Terminal block pitch 2.54mm/0.1", wire size range 28AWG to 18AWG, strip length 4.5mm, screw M1.6 steel, pin header and cage copper.
- 2x20 positions header connect to Raspberry Pi board. FR-4 fiber glass PCB, dual copper layers.
- Packing list: 1x terminal block breakout module, 4x M2.5x6mm screws, 4x 10mm nylon standoffs. 2x 11.5mm brass standoffs, 1x small slotted screwdriver (NOTE: the item not include Raspberry Pi Board).
Estimated shipping
Select a product to estimate shipping.This OONO terminal block breakout board offers a simple and direct way to monitor the status of your Raspberry Pi’s GPIO pins. It’s a convenient, pre-assembled module designed for easy integration into your projects.
Key Highlights
- Clear GPIO Status Visualization: Easily see the high or low state of your GPIO pins with dedicated green LEDs, corresponding to the Raspberry Pi’s 2x20-pin connector.
- Dual Voltage Indication: Quickly identify whether the 5V or 3.3V power rails are active using blue and red LEDs.
- Low Current Draw: Each LED operates at a minimal 0.1mA, ensuring it won't interfere with your GPIO readings.
- Easy Wiring: Utilizes a 2.54mm terminal block pitch and supports wire sizes from 28AWG to 18AWG for straightforward connections.
- Compact Design: The board measures 6.3W x 2.7H Centimeters, fitting neatly into a variety of projects.
Useful Facts
- Current Rating: 0.1 Milliamps
- Item Pitch: 2.54 Millimeters
- Connector Type: Screw
- Number Of Contacts: 40
- Voltage: 3.3 Volts
- Number Of Poles: 20
- Number of Positions: 20
- Material Type: Brass, Koper, Nylon
- Brand: OONO
- Model Number: D-1480
Good Fit For
- Raspberry Pi enthusiasts
- DIY electronics projects
- Prototyping and experimentation
- Educational electronics projects
- Anyone needing a visual indicator of GPIO status.
Specifications
| Main Specification | |
|---|---|
| Manufacturer | CZH-LABS |
| Unit Count | 1.0 Count |
| Current Rating | 0.1 Milliamps |
| Brand | OONO |
| Number of Items | 1 |
| Item Pitch | 2.54 Millimeters |
| Voltage | 3.3 volts |
| Colour | Green |
| Connector Type | Screw |
| Mounting Type | Pcb Mount |
| Number Of Contacts | 40 |
| Technical Details | |
|---|---|
| Material Type | Brass, Nylon, Koper |
| Part Number | D-1480 |
| Number of Positions | 20 |
| Number Of Poles | 20 |
| Item details | |
|---|---|
| Model Number | D-1480 |
| Others | |
|---|---|
| Product Type | Barebones |
| Item Dimensions W x H | 6.3W x 2.7H Centimeters |
| Pitch | 2.54 Millimeters |
| Tags | |
|---|---|
| Tags | |