Accusize Industrial Tools HSS Annular Cutter, N2
- 13 pc HSS Annular Cutter Kit; 2" Cutting Depth with 2 Pilot Pins
- One of each cutting Dia,: 7/16'', 1/2'', 9/16'', 5/8", 11/16'', 3/4'', 13/16'', 7/8'', 15/16'', 1'', and 1-1/16''; Pilot Pin Size: 1/4" x 4"
- Cuts holes in steel accurately, quickly & safely; Large holes can be drilled up to ten times faster than regular drills bits; Make overlapping holes, slotting holes and edge cuts
- Made from tough, high-speed tool steel
- Machine-finish hole-no reaming needed when used with lubricant; American Standard
Estimated shipping
Select a product to estimate shipping.Accusize Industrial Tools N2 13-Pc Set H.S.S Annular Cutters, 2-In Depth of Cut, 3/4'' in Weldon Shank, 2 Pilot Pins
Features
With 3/4'' Weldon shank
Cutting Diameters range from 7/16" to 1-1/16"
Cutter diameters: 7/16'', 1/2'', 9/16'', 5/8", 11/16'', 3/4'', 13/16'', 7/8'', 15/16'', 1'', and 1-1/16''
Sizes of ejector pin (pilot pin): 1/4" x 4".
Depth of Cut: 2''
Cut slotting and overlapping holes, and outside edge in steel accurately, quickly and safely.
Compared to usual drill bits, it drills larger diameter holes up to 10 times faster.
Made of tough and high-speed tool steel
With the use of lubricant, it gives machine-finish holes without the need of reaming.
American Standard (ANSI)
Unique strong case
Annular Cutters are outstanding for hole-making processes, with faster cutting speed, more long-lasting and better hole finishing. Since annular cutters take less horsepower, they are especially suitable for machines with lower power so that you can save time and use more potential cutting tools. Compared to standard twist bits, they drill much larger holes with less force and time. Accurate burr-free holes are produced with tight tolerances without pre-drilling or step drilling.
Solution of making holes on metal. They produce accurate burr-free holes to tight tolerances without pre-drilling or step drilling.
Why choose Annular Cutter Set of Accusize Industrial Tools?
Accusize N2 H.S.S Annular Cutter Set comes with cutters ranging from 7/16" to 1-1/16".
Come with 2 pilot pins
3/4" Weldon shank
2-Inch depth of cut
Recommended cutting conditions available
Lots of other sizes and depths of cut available
Made from tough and high-speed tool steel
Features of High-speed Steel Annular Cutters
with Weldon shanks
An annular cutter is a type of drilling tool, which is also called a Rotabroach, core cutter, broach cutter, magnetic drill, mag drill, core drill, trepanning drill, hole saw and cup-type cutter. They are outstanding for the hole-making process. These cutters only cut the outside edges of holes and they take less horsepower so they help save time for machines with lower power.
Good for harder steel.
Drill much larger holes and require less force and time than standard twist bits.
Take less horsepower, suitable for lower power machines.
Significantly faster than interpolating with an end mill.
Much more long-lasting than twist drills or hole saws.
Less expensive than indexable drills, twist drills, and end mills.
Eject a ‘slug’, the cylindrical steel from the cutter’s center, after the hole is cut. Chips are produced from the outside cutting edges.
Cutting teeth
Every 2 cutting teeth = 1 group
The height difference between the tooth shapes optimizes the geometry of cutting edges.
Grouped and layered cutting and optimized centring improve the removal of chips and give a fast feed rate.
Cutting geometry
The cutting geometry improves the efficiency and drill life of the annular cutters.
It increases cutting performance and reduces cutting force.
The cutting angles are effective for general use in various sorts of steel.
The U-shaped recesses improve the chip removal performance.
The special geometry of the recesses reduces the thermal load on the cutter since most of the heat produced during cutting is removed with the chips.
The spiral-shaped guide chamfers reduce the friction between the core drill and the workpiece.
Product details
Specifications
| Main Specification | |
|---|---|
| Manufacturer | Accusize Co., Ltd. |
| Unit Count | 1 Count |
| Surface Recommendation | Metal |
| Cutting Diameter | 1.06 inches |
| Shank Type | Weldon |
| Tool Flute Type | Spiral |
| Brand | Accusize Industrial Tools |
| UPC | 637665775754 |
| Cutting Angle String | 118 Degrees |
| Included Components | 2 Pilot Pins |
| Number of Pieces | 13 |
| Material | High Speed Steel (Hss) |
| Finish Type | Uncoated |
| Product information | |
|---|---|
| Number of Packs | 1 |
| Set Name | N2 |
| Technical Details | |
|---|---|
| Part Number | N2 |
| Model | N2 |
| Material Type | High Speed Steel (HSS) |
| Number of Flutes | 1 |
| Style | |
|---|---|
| Finish Types | Uncoated |
| Measurements | |
|---|---|
| Item Dimensions | 9.45 x 12.2 x 2.76 inches |
| Others | |
|---|---|
| Item Highlight | 3/4" Weldon Shank, 7/16" to 1-1/16", 2" Depth, 13 Pc 7/16" to 1-1/16" HSS Annular Cutters |
| Product Type | Annular Cutters |
| Tags | |
|---|---|
| Tags | |