CONFAST 3/16" x 2-3/4" Blue Flat Phillips Concrete Screw Anchor
- BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost
- FLAT PHILLIPS HEAD--Can be driven with Phillips Screw Driver
- SELF-TAPPING-Taps threads directly into masonry and requires no other anchor
- DIAMOND POINT-Easier to drive the screw to save time
Estimated shipping
Select a product to estimate shipping.Applications
The anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Dry environment.
Head Style
The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached.
Hole Diameter/Bit Diameter
The anchor requires a 5/32" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A #2 is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 3/16".
Length Anchor
The length of the anchor is 1-1/4"
Thread Length
The length of the threads on the anchor is 1-1/4" in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 0" to 1/4". This will ensure that the minimum embedment of 1" will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/16" diameter anchor requires the hole in the fixture to be 1/4".
Spacing between Anchors
Each anchor must be spaced a minimum distance of 3" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 2-1/4" from an unsupported edge of the concrete.
Specifications
| Main Specification | |
|---|---|
| Manufacturer | CONFAST |
| Unit Count | 100 Count |
| Item dimensions L x W x H | 1.25 X 0.25 X 1.25 Inches |
| Exterior Finish | Blue Ruspert |
| Metal Type | Zinc |
| Head Style | Flat Countersunk Phillips |
| Thread Coverage | Fully Threaded |
| Outside Diameter | 0.19 inches |
| Brand | Confast |
| Head Type | Flat |
| UPC | 820274000113 |
| Number of Items | 100 |
| Fastener Type | self-tapping-taps |
| Item Diameter | 0.19 Inches |
| Number of Pieces | 1 |
| Fastener Size | 3/16" |
| Thread Size | 3/16" x 2-3/4" |
| Material | Carbon Steel - Blue Coated |
| Colour | Blue |
| Thread Type | Un |
| Drive System | JIS |
| Item Weight | 16 Ounces |
| Product information | |
|---|---|
| Set Name | 100 pieces |
| Technical Details | |
|---|---|
| Part Number | CSF316234 |
| Material Type | Carbon Steel - Blue Coated |
| Thread Style | Right Hand |
| Thread Class | Concrete Screw |
| Compatible groove diameter | 0.14 inches |
| Set Screw Thread Type | Unified National |
| Style | |
|---|---|
| Finish Types | Blue Oxide Coated |
| Measurements | |
|---|---|
| Item Dimensions | 1.25 x 0.25 x 1.25 inches |
| Others | |
|---|---|
| Item Highlight | Includes Drill Bit, For Anchoring to Masonry, Block or Brick - 100 per Box |
| Product Type | Concrete Screws |
| Size Name | 3/16" x 2-3/4" |
| Screw Head Style | Flat Countersunk Phillips |
| Screw Point Style | diamond point-easier |
| Tags | |
|---|---|
| Tags | |