MICROJIG Matchfit DS-333 Dado Stop, Yellow
- Make perfectly-fitting dados on your table saw, with any saw blade
- Fast, most Precise way to cut dados with any table saw
- Perfect for mircojig pushblock
Estimated shipping
Select a product to estimate shipping.MICROJIG Unveils the MATCHFIT Dado Stop
Cutting-edge addition to the MATCHFIT System creates precise dado cuts
The MATCHFITTM Dado StopTM. An innovative, new accessory to the MATCHFIT Dovetail Clamp System, the MATCHFIT Dado Stop makes crosscutting safer and takes the guesswork out of creating precise dado cuts.
Innovative Design
The MATCHFIT Dado Stop has a unique design that makes creating tight-fitting joinery simple and easy. Using the Dado Stop is simple with a three step process, woodworkers can cut cross dados with absolute precision for half laps, inlays and other tricky joinery without measuring, marking or test cuts because the actual stock that is going to go into the groove is used to gauge the cut width. By accounting for the thickness of the material plus the blade kerf, the Dado Stop makes it simple and easy to set the width of the dado cut, ensuring a perfectly matched fit.
A cinch to use, the MATCHFIT Dado Stop is secured to a table saw rip fence with a MATCHFIT Dovetail Clamp. Then the width of the dado cut is set in a simple three step process:
Step 1: set the kerf;
Step 2: set the dado;
Step 3: cut the dado.
Watch the MATCHFIT Dado Stop instructional video and see how easy it is to set up and use.
Versatility
The MATCHFIT Dado Stop not only allows for cutting very accurate cross dados, it can also be used for calibrating the rip fence scale. As the fixed center leg on the Dado Stop is exactly three inches long, the rip fence can be set so that the fixed leg of the Dado Stop is just touching the teeth of the blade, and then the rip fence scale can be calibrated to exactly three inches, making cross-cutting with this setup amazingly accurate. And using the Dado Stop as a crosscut stop when cutting with a miter gauge virtually eliminates the risk of kickback as off-cut parts will not get caught between the rip fence and the saw blade.
“Creating tight-fitting dados has always been a time-consuming chore involving multiple test cuts to get the dado width exactly where I needed it,” commented Ralph Bagnall, Technical Specialist for MICROJIG. “Now with the MATCHFIT Dado Stop, the guesswork is eliminated and I can make the exact cut I need quickly and accurately every time.”
Work Smarter, Add to Cart and Place Your Order Today!
Step 1: Set the Kerf for Precision
MATCHFIT Dado Stop is a breakthrough product that eliminates guesswork, test cuts, and tricky measurements when it comes to making precise dado cuts. With three simple steps, you'll get a perfect match fit when making inlays, half laps, and many unique styles of joinery.
With any table saw blade or stack dado set, you start by gauging the thickness of the blade. MATCHFIT Dado Stop makes this easy.
Step 2: Set the Dado with Material Fitted
Simple and easy to use, the MATCHFIT Dado Stop sets the shoulders of your cross dado using the actual part that will be fitted in the dado for a perfect fit without measuring or test cuts.
Only by using the material being fitted to the groove can you make an exact setup gauge. MATCHFIT Dado Stop locks in the positions of your first and end cut of the dado.
No hassles, no tricky measurements, just perfect-fitting dado cuts.
Step 3: Cut the Dado
With your MATCHFIT Dado Stop locked into position, it's time to make your cuts.
1. Use Leg No.1 to cut your first shoulder.
2. Use Leg No.3 to cut your second shoulder.
3. Clear the center with multiple passes.
It only takes minutes to make your perfect-fitting dado cut.
Perfect fit is a cinch
With the dado cut clear, insert the inlay material into your workpiece for a perfect-fitting dado.
Never before has it been this easy from start to finish to make an accurate and snug fitting dado cut. With MATCHFIT Dado Stop, your next project requiring dado cuts will be a cinch. Work smarter.
Set The Kerf
Set The Dado
Cut The Dado
Perfect-fitting Dados
Joinery made simple and snug with no tricky measuring.
Beautiful no-miter picture frames makes a perfect-fitting keepsake.
Build shelving and drawers with precision and speed. Skip the troublesome test cuts.
What's In The Box?
(1) MATCHFIT Dado Stop.
(1) Illustrated Instructions MATCHFIT Dado Stop.
Note: The MATCHFIT Dado Stop accessory is for use with MATCHFIT Dovetail Clamps only. Sold separately.
Product details
Specifications
| Main Specification | |
|---|---|
| Included Components | (1) MATCHFIT Dado Stop, (1) Product Instructions |
| Manufacturer | MICROJIG |
| Unit Count | 1 Count |
| Handle Material | Plastic Or Rubber |
| Item dimensions L x W x H | 3.14"L x 2.73"W x 3.23"H |
| Surface Recommendation | Wood |
| Blade Length | 3 Inches |
| Number of Teeth | 30 |
| Brand | Microjig |
| UPC | 815267010644 732454670538 |
| Number of Items | 1 |
| Power Source | Ac Adapter |
| Colour | yellow |
| Blade Material | High Speed Steel |
| Blade Shape | Rectangular |
| Global Trade Identification Number | 00815267010644 |
| Item Weight | 5.6 Ounces |
| Product information | |
|---|---|
| Warranty Type | Limited Warranty |
| Technical Details | |
|---|---|
| Manufacturer Part Number | DS-333 |
| Item details | |
|---|---|
| Model Number | DS-333 |
| Item Type Name | MATCHFIT Dado Stop by MICROJIG |
| Manufacturer Warranty Description | Extended 3-Year Manufacturer's Warranty from Authorized Dealers Only |
| Others | |
|---|---|
| Other Special Features of the Product | Unique dado setting mechanism, cross-cut stop with repeatable cuts, and compatibility with regular blades |
| Product Type | MATCHFIT Dado Stop by MICROJIG |
| Tags | |
|---|---|
| Tags | |