Mini OTDR Fiber Optic Tester 1310/1550nm 26/24dB SM - 4.3" Touchscreen Optical Time Domain Reflectometer, Built-in VFL OPM OLS Event Map, 11-in-1 Complete Test Kit for FTTH Networks
- PROFESSIONAL 11-IN-1 OTDR FIBER TESTER - Complete fiber testing solution with Auto OTDR, Expert OTDR, Event Map, Optical Power Meter (OPM), Visual Fault Locator (VFL), Optical Light Source (OLS), Optical Loss Test (OLT), and RJ45 Cable Tracer. 1310/1550nm dual-wavelength testing with 26/24dB dynamic range for accurate fiber analysis up to 100km. One device replaces multiple tools - save money and fieldwork time.
- 4.3" HD TOUCHSCREEN - ONE-BUTTON AUTO TESTING - User-friendly 800×480 resolution display with intuitive UI design makes professional fiber testing simple. Auto OTDR Mode enables even beginners to perform accurate measurements without complex settings - just connect and test. Expert Mode available for advanced users who need granular control. Computer-level file management for easy data organization.
- 12 HOURS CONTINUOUS TESTING - ALL-DAY FIELDWORK READY - Powerful 4,000mAh lithium battery with intelligent power-saving technology ensures full-day operation without recharging. 20 hours standby time for multi-day projects. Built-in LED flashlight for night operations and dark environments. Perfect for remote FTTH installation, telecommunications maintenance, and outdoor fiber network deployment.
- DATA STORAGE & PROCESSING - you can upload data to PC via USB port, further analysis or processing can be done via management software. Built-in 8G memory card can save up to 200,000 curves. Generate professional PDF reports for customer delivery. Supports multiple measuring units (KM, Feet, Miles)
- COMPLETE TEST KIT - EVERYTHING INCLUDED - Not just an OTDR, this is a complete professional fiber testing solution. Package includes: OTDR main unit, FC/UPC connector (pre-installed), + SC + ST + LC adapters for all fiber types, protective carrying case, rechargeable battery, USB cable, wall charger, analysis software, user manual. Ready to use out of the box.
Estimated shipping
Select a product to estimate shipping.This Single Mode OTDR adopts 4.3-inch capacitive touch screen. It integrates over 10 functions, such as auto OTDR, expert OTDR, event map, OPM, RJ45 cable tracker, and “computer level” file management to meet various test requirements in different occasions.
You can use this OTDR in the maintenance, construction and monitoring of optical cable lines. It can measure the length of optical fiber, transmission attenuation of optical fiber, attenuation of connector and fault location.
Selected Key Features of this OTDR Tester
OPM supports CW/270/330/1K/2KHZ frequency identification
VFL and OLS can run in the background, multi task can be operated simultaneously
OLS supports CW/modulation mode output with adjustable output power
Once click screen capture, easy to save the interface
Multi-touch support gesture zoom in and out curve
Optical loss test, Insertion loss test
20 hours standby, ultra wide operation temperature
QIIRUN Commitment
As a growing brand, QIIRUN is committed to provide high quality products and services to our valued customers. Our service agents will spare no efforts to provide first class services and technical supports so as to exceed your satisfactions.
We honor our commitments:
Your every purchase is entitled to a 30 days return at no cost from date of purchase for any reason
You can get lifetime technical supports / assistance if needed
Your any questions will be addressed in a timely and professional manner
Multi-Functional OTDR Tester
OTDR Auto Test
It only needs to set the wavelength and measurement time
Other parameters are automatically selected by the instrument to complete the test
No complex setting, one key operation
OTDR Expert Test
Parameters such as wavelength, test range and pulse width shall be set
The test results are more accurate by selecting the appropriate measurement parameters in the expert mode
You can zoom in on the curve to see the details of each event.
Event Map
The function is fully one key automatic test
Information such as the length of the optical fiber link to be measured, the type of the joint and the position of the breakpoint are displayed graphically
The results are clear and easy to understand
Analysis Software
Analysis Software is included in the built-in 8G TF card within the OTDR.
Data format is standard SOR. format.
Simply connect the OTDR tester and computer via USB cable
Open fold named "OtdrAnaEng"
Open file named "Analyse_OTDR" and install it.
Optical Power Meter
It is used for signal power test and insertion loss test of various equipment and photoelectric components.
It can identify and measure the power of 270/ 330/1k/2kHz frequency
Calibration Wave: 850/980/1300/1310/1490/1550/1625/1650nm
Test Range: -70-+10dBm
Resolution: 0.01Db
Uncertainty:±5%
Visual Fault Locator
It is suitable for the detection of bare optical fiber, optical fiber jumper and other optical fiber which can leak red light
Open: turn on the VFL and output in continuous mode
1Hz: VFL flashes at 1Hz
2Hz: VFL flashes at 2Hz frequency
Close: turn off VFL
Wavelength: 650nm±20nm
Output Power:≥10km
Mode: CW/1HZ/2HZ
Optical Light Source
It can output with the same wavelength as OTDR function, which can be used to test the parameters of telecommunication, CATV and LAN optical cables, test the insertion loss, isolation, etc.
There are 5 working modes : CW, 270Hz, 330hz, 1kHz and 2kHz
Other Information You Need
4.3-inch 800*480 IPS TFT-LCD Touch Screen
3.7v, 4000mah Lithium battery
continuous test >12 hours
Internal storage 8GB, ≥ 20000 curves
Working Temperature: -10°C-+50°C
Weight: 488g (include battery)
Size: 173*109*45mm
Endface Inspector function is NOT available in this tester. It is sold separately.
RJ45 Cable Tracking and Sequence/Length Test
RJ45 Cable Tracking (LAN 1 Port)
Turn on RJ45 cable tracking function. The line finding mode of this machine is digital radar type, which has strong anti-jamming ability. Test Distance is up to 300m.
RJ45 Sequence / Length Test (LAN 2 Port)
When testing, please connect to the remote module at the bottom of the instrument. There are two kinds of wires for RJ45 connector: straight line and interleaved line.
ATTENTION
Please connect LAN 1 or LAN 2 correctly, or it may cause damage to the OTDR.
Selected OTDR Specification
Product details
Specifications
| Main Specification | |
|---|---|
| Compatible Devices | Fiber optic cables (FC/UPC, SC, ST, LC), 1310/1550nm wavelengths, various measuring units (KM, Feet, Miles) |
| Colour | Black, Gray, Blue |
| Manufacturer | NUO KE |
| Brand | QIIRUN |
| UPC | 086291170769 |
| Number of Items | 1 |
| Included Components | 8G TF Card |
| Power Source | Battery Powered |
| Style | Handheld |
| Item Weight | 488 g |
| Technical Details | |
|---|---|
| Part Number | NK4000D |
| Model | Handheld |
| Measurement Type | Optical Power Meter |
| Style | |
|---|---|
| Style Name | Handheld |
| Measurements | |
|---|---|
| Item Dimensions | 6.69 x 4.29 x 1.77 inches |
| Others | |
|---|---|
| Product Type | Network & Cable Testers |
| Minimum Operating Voltage | 3.7 Volts |
| Tags | |
|---|---|
| Tags | |