THMOOTHER 10-Pack 3.28FT V Shape LED Strip Aluminum Channel with Clear Cover, Extruded Alu Track with Transparent PC Lens and Mounting Kit,Easy Cut and Installed Corner Mount Profile (10, 3.28FT)
- Thickening Clear Cover Result a Stable And Anti Yellowing Performance in Corner Mount Application, the Transparent Cover Allows the Light to Pass Through Without Reducing The Brightness. Therefore the Illumination is Brighter Than the Milky Cover. <br>
- Cover is Easy Snapped Into the Extruded Rail, It Protect The Exposed Strip From Dust And Moisture .It is Widely Used in Lighting of Non-Eye-Direct-Viewing Areas to Achieve Good Energy-Saving Effects.<br>
- The Channel Can Be Trimmed To Required Length Easily By Hacksaw Or Grinder,The Cover Can Be Cut By Utility Knives And Scissors,The Cover is protected by Film Initially <br>
- The Aluminum Track Is Designed To Hold The Strip Less Than 12.1mm(0.48’) Wide ,It Fit For A Majority Of 5050 5630 2835 Steady color ,RGB RGBW Tape(not for Hue 2ND) <br>
- The Package Included V Shape Channel 3.28FTX10 ,Clear PC Cover X10 ,Mounting Clips X30,Stainless Steel M3X12 Countersunk Screw/Carbon Steel M3X20 Screw/ Wall Anchor X30,End Caps With Hole X10 ,End cap without Hole X10 <br>
Estimated shipping
Select a product to estimate shipping.Aluminum Channel With Transparent Cover
Extruded Aluminum Channel In Silver Color With Oxide Layer ,The Profile is Rigid and Not Easily Deformed ,It have Good Corrosion Resistance And Improve Heat Management to Prolongs The Life Span of Tape Light
The Clear Cover Can Let 97% Light Through , It Can Not only Protect The Exposed Tape From Dust and Moisture But Also Save More Energy Than Milky Cover With The Same Lumen Output
End Caps
End Cap With Hole and Without Hole
The Hole is 5.5X4MM Which Can be Expanded
1 Set/3.28FT
2 Set/6.56FT
Mounting Kit
Stainless Steel Mounting Clips
Tight Fixing And Can be Used As the Connector for 2 Channels
3 Pieces For 1 Channel In 3.28FT
4 Pieces For 1 Channel In 6.56FT
Screw and Anchor
M3X12MM Stainless Steel Screw ,Steady Installation and More Durable In Mositure Enviroment Like Kithcen
M3X20MM Carbon Steel Screw Which is Magenetic and Fit For Wall/ Ceiling Application
The Wall Anchor is Supplied For Wall Mounted ( The Screw Might Not Be Long Enough For The Wall Anchor , Longer Screw Is Easily Got In Local)
3 Sets For 1 Channel In 3.28FT
4 Set For 1 Channel In 6.56FT
Channel With Cover
Mounting Bracket
The Testing Report For Light Effect With Or Without Frosted Cover
Our Milky Cover Use High Transmittance Material ,The Data Is Based On Our Milky Cover , It Might be Different By Others
1. With 90% Light Transmittance Rate Milky PC Cover The Light Still Loss Around 20%
2. The Correlated Color Temperature Shift Around 3% With Milky Cover
3. Color Redering Index Shift Around 1.5% With Milky Cover
For Clear Cover ,In the Same Lumen Output , The Energy Cost Shall Be 15-20% Less Than Milky Cover Denpending On the Milky Cover Transmittance.
The Color Temperature and Color Rendering Index Brought By the Transparent Cover are Closer to the Light Source Itself Also .
Therefore,Transparent Covers are More Recommended In Applications Where Light Sources are Hidden.
Light Effect For The Strip With Milky Diffuser And Transparent Cover
THMOOTHER is Specializing In LED Strip Channel Diffuser
Milky Cover Is The Most Popular Version Since It Can Turn The Harsh Dot to Beautifully Soft and Atmospheric Illumination
But For Energy Conservationist, The 20% Or More Light Loss With Milky Cover Is Not Acceptable.
Or In Many Cases ,The Lighting Fixture Is Concealed ,You Will Not Be Worried About The Glaring Problem ,
Clear Cover Is A Better Alternative Since It Generate A Smooth Glow Also On The Non-glossy Working Surface
LED Strip Channel V Shape Installation and Connection
The Channel Fit For LED Strip Light Less Than 1/2 Inch Wide Which Include Single color, Tunable white, RGB and RGBW Programmable LED strip lights
It can be Installed By 3 Ways :
1. Mounting Clips -The Bracket is Fixed By Screw and Can Also Be Used as a Connector Between Two Aluminum Profiles For Extension
2. Double Sided Tape - The Double Sided Tape Is Used For Suface Mounted ( Not Included )
3. Drill Hole On Channel And Mounting By Screw - Need to Be Drilled By Customer
For Cornner Connection
The Channel Can be Connected By Corner Connector ,It Also Can Be 45 Degree Mitre
The 90/270 Degree Connector Need To be Ordered Indepdently
Product details
Especificaciones
| Main Specification | |
|---|---|
| Material | Aluminio, Plástico |
| Fabricantes | Sunny Wood |
| Formulario de artículo | Rigid |
| Tema Dimensiones L x W x H | 39.4 x 0.63 x 0.63 inches |
| Marca | THMOOTHER |
| Número de artículos | 10 |
| Forma | V Shape |
| Color | Plata |
| Technical Details | |
|---|---|
| Número de la parte | 1002-T |
| Measurements | |
|---|---|
| Tema Dimensiones | 39.4 x 0.63 x 0.63 inches |
| Otros | |
|---|---|
| Tipo de producto | Channels |
| Grade Rating | Comercial |
| Forma del tema | V Forma de forma |
| Etiquetas | |
|---|---|
| Etiquetas | |