Spiral Flush Trim Router Bit 3/8" Diameter,3/8" Length, 1/4 Shank
- 🔨Solid carbide flush trim router bit has a 3/8" cutting edge,3/8" cutting height,with 1/4" shank.Forming an exact duplicate of the template.
- 🔨The 3/8"*3/8" solid carbide insert head welded to a hardened steel core,with better chip evacuation, less heat buildup,minimal wear and much longer life.That highly performs like a solid tungsten carbide bit which is considerably less expensive
- 🔨3 Flute yield a very smooth cut than 2 flute.While down-cut geometry design produces an excellent finish on the top of the surfaces when trimming
- 🔨1/4" shank made by solid steel, heat treated,lower vibration and added stability.Cutters with high quality guided bearing,reduce setting up time for curved workpieces. Ensures perfect guidance and smooth running,reduce trimming mishaps,largely reduces chipping
- 🔨 The bits perform well on plywood, MDF, solid woods, plastic laminates and non-ferrous metals.Can be used on hand held and table mounted routers. RPM 28 000
- Tips:Remove the shank ball bearing pilot,it can be used as a Straight Bottom Cleaning Bits for dado,joints,slot,internal clean-cut
Estimated shipping
Select a product to estimate shipping.NOTE:
1.Insert the cutter shanks into the collets as deep as possible,leave 3mm or less shank showing.
2.Before the product is received for using, check the drill bit for cracks or chips,we provide perfect after-sales service.
3.Trial cuts should be made on waste material before starting any project.
Solid Carbide Flush Trim Router Bits 1/4 Shank
Akylin Pattern Router Bit Top Bearing 1/4 Inch Shank,perfet for pattern work, laminate routing & counters general flush trimming, template cutting, edge profiling.
3 Flute yield a very smooth cut than 2 flute.
While down-cut geometry design produces an excellent finish on the top of the surfaces when trimming
Can't on CNC unless removing the shank ball bearing pilot to get a Straight Bits.
Aslo can be used as a Straight Bottom Cleaning Bits for dado,joints,slot,internal clean-cut
Shank:1/4"
Cutting Diameter:3/8"
Cutting Height:3/8"
Product details
Especificaciones
| Main Specification | |
|---|---|
| Fabricantes | Akylin |
| Cuenta de unidad | 1 Cuenta |
| Diámetro de corte | 0,38 pulgadas |
| Marca | Akylin |
| Número de artículos | 1 |
| Tipo de corte | Flush-Trim Cut |
| Longitud de corte | 0,38 pulgadas |
| Componentes incluidos | Bits Router |
| Diámetro del elemento | 0,38 pulgadas |
| Material | Carbide |
| Tamaño | 3/8" D*3/8" LH-Z3 |
| Technical Details | |
|---|---|
| Número de la parte | US-AK049595FXXB-3F |
| Tipo de material | Carbide |
| Número de fluidos | 3 |
| Otros | |
|---|---|
| Tema | Carbide Plunge Pattern Template Down Cut 3 Flute, Flush Cut Bits for Flush Trimming, Dado, Bottom Cleaning with Top Bearing |
| Tipo de producto | Trim |
| Nombre del tamaño | 3/8" D*3/8" LH-Z3 |
| Etiquetas | |
|---|---|
| Etiquetas | |