MECCANIXITY 12 Pcs Phosphor Copper Solder, Low Temp Welding Stick 5/64"x10" for Hvac Refrigerator Repair
- The HVAC tools and equipment are used for brazing copper in motors, air-conditioners, meters, and refrigeration industries. Brazing rods can braze some pipes, the small copper braze job, and the art project. The low-melt solder is widely used for refrigerator copper tubes, air conditioner copper tube welding, copper product welding, DIY craft drift punches, and knife handle latches.
- Size: 2 mm x 250 mm/0.08 inch x 9.84 inch (Dia*L); Welding Current: 80(A); Melting Point: 710°C/1310°F; Color: Copper; Style: Round Straight Bar; Material: Phosphor Copper (L201); In the package of: 12PCS x Welding Rods
- 1. The flux is evenly distributed, and has good continuity; 2. The welding stick will not get tangled during welding and will not block the conduit; 3. There is less spatter and smog during welding, and the solder joints are firm; 4. Good fluidity during welding, strong caulking, and can flow into small spaces.
- 1. Clean the surface of the copper material to be welded; 2. Insert the stick into the welding gun or pen, and adjust the welding current and power as needed; 3. Contact the welding stick with the copper material to be welded to melt the contact; 4. Remove welding slag and remaining stick after cooling.
- For manual measurement, please allow slight errors in size. Before using these brazing rods, please keep proper ventilation, adhere to recommended temperature ranges, and wear appropriate safety gear during use.
Estimated shipping
Select a product to estimate shipping.Copper Brazing Rods for Copper Repair Hvac Refrigerator
The HVAC tools and equipment are used for brazing copper in motors, air-conditioners, meters, and refrigeration industries
Brazing rods can braze some pipes, the small copper braze job, and the art project
The low-melt solder is widely used for refrigerator copper tubes, air conditioner copper tube welding, copper product welding, DIY craft drift punches, and knife handle latches
Widely Application:
Welding of refrigerator copper tubes
Air conditioner copper tubes
Copper water pipes
Suitable for the electromechanical industry
Advantage:
the welds are firm
evenly distributed
good continuity
less spatter and smoke during welding
can flow into small spaces
How to Use
1. Clean the surface of the copper material to be welded
2. Insert the stick into the welding gun or pen, and adjust the welding current and power as needed
3. Contact the welding stick with the copper material to be welded to melt the contact
4. Remaining stick after cooling
Note:
maintain ventilation
adhere to temperature ranges
wear safety equipment
Product details
Especificaciones
| Main Specification | |
|---|---|
| Fabricantes | MECCANIXITY |
| Cuenta de unidad | 1 Cuenta |
| Formulario de artículo | Rod |
| Marca | MECCANIXITY |
| Forma | Rectangular |
| Diámetro del elemento | 2 milímetros |
| Tema | 0,08 pulgadas |
| Material | Copper |
| Color | Copper |
| Peso del artículo | 0,09 kg |
| Technical Details | |
|---|---|
| Número de la parte | mea231203ee000187 |
| Otros | |
|---|---|
| Tipo de producto | Brazing Rods |
| Grade Rating | Comercial |
| Forma del tema | Rectangular |
| Etiquetas | |
|---|---|
| Etiquetas | |