ElecGear Hall Joystick Kit Replacement for DualSense PS5 Controller, 2X Hall Effect Control Stick + 2X Calibration PCB + Desoldering Repair Tools for Analog Stick Thumbsticks – HL-PS5
- [2x Hall Effect Joysticks for PS5] – Hall thumbsticks Replacement for DualSense PS5 controller (DS5). With the electromagnetic hall sensors inside, the control stick delivers higher sensitivity and accuracy. No more wear of traditional carbon film resistor, say goodbye to drifting. Made from durable material with excellent rocking structure, it provides smoother movement and longer lifespan
- [2x Added-on Calibration PCB] – The tiny PCB was designed to stack on the back of main board. The moving signal is input to the high speed MCU. The calibrated signal outputs to the main board of controller. Connect the controller to a PC with a USB cable. You can fine reset the center and trim the curve via a web link. The accurate centering with no drift is essential for FPS aiming
- [Desoldering Tools included] – A copper heating plate melts all the solder joints simultaneously simply with a soldering iron. Solder Wick, Holes Cleaner and simple PCB holder included. With as many as 14 prongs, removing the old problem stick is the most difficult task. It might is not suitable for newbies, though we added these helping hand in the kit
- [Compatibility and Reminder] – 1. Please carefully study the images for compatible controller. 2. The soldering iron must be more than 60W. And the operation takes serious soldering skill and devices to desolder the old stick off the PCB. 3. Seriously follow the steps we presented on the installation guide for this kit is novel and tricky
- [What’s in box Model: HL-PS5] – 2x Hall Joysticks, 2x Calibration PCB, 1x Heating Plate, 1x Solder Wick, 1x Hole Cleaning Tubes. (🔺Teardown screwdriver tools, USB wired/wireless controllers, Other soldering tools and materials are required, however NOT included.)
Estimated shipping
Select a product to estimate shipping.Model: HL-PS5 Hall Effect Joysticks Replacement for PlayStation 5 Wireless Controller Calibration PCB with MCU for the finest Centering and Rocking Curve A Copper Heating Plate and Solder Wick help a lot for the Desoldering Reminders: 1. Works with DualSense PS5 controller with main board BDM-010, BDM-020, BDM-030 and BDM-040 2. Not work with DualSense Edge (DSE) 3. Not fully tested with some customized controllers based on DS5 like SCUF and other 3rd. The added back button board might be removed before settings 4. The operation takes serious soldering skill and devices. The soldering iron must be more than 60W 5. Seriously follow the steps we presented on the guide for this kit is novel and tricky 6. Teardown screwdriver tools, USB wired/wireless controllers, Other soldering tools and materials are required, however NOT included What’s in the box: 2x Hall Joysticks 2x Calibration PCB 1x Heating Plate 1x Solder Wick 1x Hole Cleaning Tubes
Especificaciones
| Main Specification | |
|---|---|
| Fabricantes | ElecGear |
| Tipo de control | Gamepad |
| Marca | ElecGear |
| Tecnología de la conectividad | USB |
| Number of Buttons | 14 |
| Dispositivos compatibles | Gaming Console |
| Technical Details | |
|---|---|
| Número de pieza del fabricante | HL-PS5 |
| Item details | |
|---|---|
| Número de modelo | HL-PS5 |
| Otros | |
|---|---|
| Modelos compatibles de consola de juego | Microsoft Xbox One, Sony PlayStation 5, Microsoft Xbox One S, Microsoft Xbox One X |
| Tipo de producto | Tarjetas USB de puerto |
| Hardware Platform | Gaming Console |
| Button Cantidad | 14 |
| Etiquetas | |
|---|---|
| Etiquetas | |