About Receiver:
Model : WJZH-M01
Working voltage:DC8-36V
Quiescent condition:Less than 8mA
Working temperature:-40 Degree +80 Degree
Receiver sensitivity:more than -105dBm
Working frequency:433mhz
Function:Limit & Wire External Button
Max load :10A (suggest motor load less than 5A)
Size:68 x 44 x 25mm
Working Model:Working way changed by learning button on the Receiver
Momentary : press and hold the transmitter button up,motor forward.Release the button,motor stop. press and hold the transmitter button down ,motor Reverse.Release the button,motor stop.
Latched : press the transmitter button up once,motor forward, press the transmitter button stop,motor stop. press the transmitter button down once, motor reverse, press the transmitter button stop,motor stop.
Learning and clearing
Learning method:
Momentary: Press learning button once, the indicator flash once and ON , Then press the transmitter button up ,the learning indicator flash 3 times and ON,Then press the transmitter button down, the learning indicator flash 3 times and OFF, It mean the Momentary model learning Successfully
Latched: Press learning button 2 times, the indicator flash 2 times and ON , Then press the transmitter button up, the learning indicator flash 3 times and ON, Then press the transmitter button stop, the learning indicator flash 3 times and ON again, Then press the transmitter button down, the learning indicator flash 3 times and OFF, It mean the Latched model learning Successfully
Clearning method: Press learning button 3 times, the learning indicator will flash 5 times and OFF , It mean all the transmitter code in the receiver have been cleared.
Features
Manual control (default momentary)
Momentary: The MD soldered dot on the receiver don't need to be connected. Press and hold the external K1 button motor will forward. and the motor stops after Release the button. Press and hold the external K2 button, the motor reverses, and the motor stops after Release the button.
Latched: The MD soldered dot on the receiver need to be connected. Press the external K1 button motor will forward. and the motor stops after press the external SW1 Limit switch. Press the external K2 button, the motor reverses, and the motor stops after press the external SW2 Limit switch.
