findmall 12 Pcs 1/8"-3/4" ER32 ER-32 Collets Set With 9/16 5/8 11/16
- Range - 1/8, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4-inch
- Material: These spring collets are made of good materials spring steel, they are stable and practical in performance
- High Performance - All critical collet surfaces are accuracy ground for an accurate fit. The total runout is less than 0.0006 inch
- Application - For boring, milling, drilling, tapping, engraving, CNC, spindle machines, and other processing
- Package - Each collet is well packed in separate container with label, moreover, each collect is mark with size, so its easy to distinguish them
Estimated shipping
Select a product to estimate shipping.12 PCS ER32 Collets Set
Model: ER32
Material: Spring Steel
Run-Out Tolerance: 0.015MM(0.0006")
Range: 1/8" , 3/16" , 7/32" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 9/16" ,5/8" , 11/16" , 3/4"
Using high grade spring steel is table in perfomance, with high accuracy and good elasticity.
Suitable for boring, milling, drilling, tapping, engraving, CNC, spindle machines, and other processing.
Come with 12 pcs ER32 spring collet, each collet with a separate protective container.
Is it individual packing?
Each product has its own special storage box, which is very convenient for you to store and carry.
How to install it?
Before installation, clean the positioning cone of the ER32 elastic collet and the lock nut, tilt the elastic collet and the lock nut at a certain Angle, gently put the lock card slot, and then screw the lock nut on the special shank of the ER32.
Can I lock the nut before loading the cutter?
It is strictly prohibited to lock the nut when the spring chuck is not loaded with the tool, so as to avoid deformation or brittle cracking of the elastic collet.
Are there any precautions when using it?
The spring collet must tighten the nut with the hook wrench to clamp the tool, so as to avoid the tool flying out during high-speed rotation and causing accidents.
How do I remove it after installation?
After the nut is unscrewed from the handle, pull out the cutter, push from the front of the collet and press down against the bottom of the eccentric circle at the same time, push the collet diagonally until the collet and the nut break apart.
Product details
Especificaciones
| Main Specification | |
|---|---|
| Componentes incluidos | 12Pcs ER32 Spring Collet, Protective Containers |
| Dispositivos compatibles | Máquina de perforación, Máquina de molino, Máquina CNC |
| Fabricantes | Encontrarmall |
| Tipo de bloqueo | Manual |
| Marca | Encontrarmall |
| Capacidad | 0.75 inches |
| Diámetro del elemento | 0,38 pulgadas |
| Tamaño del pan | 1.25984-4 UNC |
| Material | Spring Steel |
| Peso del artículo | 1,71 kg |
| Technical Details | |
|---|---|
| Número de pieza del fabricante | No aplica |
| Tipo de material | Spring Steel |
| Tipo de manija | apretado a mano |
| Número de artículos | 1 |
| Item details | |
|---|---|
| Número de modelo | No aplica |
| Otros | |
|---|---|
| Tema | Alta precisión, Versatile Application, Clearly Marked Sizes |
| Tipo de producto | Collets |
| Etiquetas | |
|---|---|
| Etiquetas | |