Oshlun LG-R01 Radial Arm Saw Laser Guide,Grey
- Fits most radial arm saws and saws with a threaded 5/8-Inch arbor shaft
- New recessed laser design to protect the laser from hitting the material on deep cuts
- New thinner design to fit more saws
- New brighter and more accurate laser line
- Includes extra set of LR44 batteries
Estimated shipping
Select a product to estimate shipping.Our new 2nd generation laser guide is the easiest and best way to turn your saw into a precision cutting machine. Installation is fast and easy, simply replace the outer blade flange with the laser unit. There are no confusing parts or adjustments. The laser guide provides a brighter, more accurate line on the left of the saw blade kerf and improves safety by showing you where the blade will cut. The centrifugal switch activates the laser automatically. Notes: If your saw has a 5/8-Inch threaded arbor shaft and uses a nut to secure the blade, this laser guide should fit. Will not fit some 12-Inch saws that have interlocking arbor flanges, including Rigid and ProTech. 630-680nm, Max Output: <5mW, Class IIIa Laser Product. Complies with subchapter J, 21 CFR CH 1. Wavelength: 630-680nm, Max Output: <5mW, Class IIIa Laser Product. Complies with subchapter J, 21 CFR CH 1.
Oshlun’s new 2nd generation laser guide is the easiest and best way to turn your saw into a precision cutting machine. Installation is fast and easy, simply replace the outer blade flange with the laser unit. There are no confusing parts or adjustments. The laser guide provides a brighter, more accurate line on the left of the saw blade kerf and improves safety by showing you where the blade will cut. The centrifugal switch activates the laser automatically. Notes: If your saw has a 5/8-Inch threaded arbor shaft and uses a nut to secure the blade, this laser guide should fit. Will not fit some 12-Inch saws that have interlocking arbor flanges, including Rigid and ProTech.
Oshlun Laser Guides (LG-M01 and LG-R01)
2nd Generation Design
Our 2nd generation laser guide is the easiest and best way to turn your saw into a precision cutting machine. Installation is fast and easy, simply replace the outer blade flange with the laser guide unit. There are no confusing parts or adjustments. The new design provides a brighter, more accurate line on the left of the saw blade kerf and improves safety by showing you where the blade will cut well before reaching the material. The centrifugal switch activates the laser automatically.
Notes: Will not fit some 12" saw models that have interlocking arbor flanges, including some Ridgid, ProTech and Hitachi saws (see LG-M01 installation note below for more details). If your saw has a 5/8" threaded arbor shaft and uses a nut to secure the blade, use model #LG-R01.
Item #LG-M01 Installation Note: The arbor recess on the laser guide is made to fit many machines and may have some amount of play when mounted. To address the universal arbor recess, when installing the laser guide, once it is placed on the arbor you can rotate it slightly which will allow the laser guide to self-center on the end of the arbor shaft prior to tightening down. In some cases such as 12" machines and those with metric arbor sizes, the blade adapter or inside arbor flange washer can protrude past the blade body preventing the laser guide from tightening down fully on the blade. Often this compatibility issue can be overcome by utilizing a full kerf blade, or if needed, a thinner blade adapter on your machine.
Warning: Read and follow all instructions that came with your saw. Never look directly into the laser beam. Do not use if the laser guide does not secure the blade properly.
LG-M01 FEATURES
- Fits most 7-1/4”, 8”, 8-1/4”, 10”, and 12” miter, sliding miter, chop, and portable saws
- New recessed laser design to protect the laser from hitting the material
- New thinner design allows it to fit more saws
- New brighter and more accurate laser line
- Includes an extra set of batteries
- 5/8" Recessed Squared Mounting Hole (Approximate Dimensions: 0.6325" x 0.557")
- Overall Dimension: 2.05" Diameter x 0.35" Thick
LG-R01 FEATURES
- Fits most radial arm saws and machines with a threaded 5/8” arbor shaft
- 5/8" Mounting Hole
LG-M01 Front
LG-M01 Back
LG-R01 Front
LG-R01 Back
Product details
Especificaciones
| Main Specification | |
|---|---|
| Fabricantes | Oshlun |
| Cuenta de unidad | 1 Cuenta |
| Número de baterías | 3 baterías no estándar necesarias. (incluido) |
| Material de la manija | Plástico |
| Tema Dimensiones L x W x H | 7.01"L x 5.98"W x 0.63"H |
| Recomendación sobre la superficie | Madera |
| Longitud de la hoja | 12 pulgadas |
| Marca | OSHLUN |
| UPC | 745332210351 892592001967 |
| Número de artículos | 1 |
| Componentes incluidos | Laser Guide |
| Fuente de energía | Batería alimentada |
| Color | Grey |
| Material de la hoja | Acero de alta velocidad |
| Blade Shape | Ronda |
| Número de identificación del comercio mundial | 00892592001967 |
| Peso del artículo | 3.84 onzas |
| Technical Details | |
|---|---|
| Número de pieza del fabricante | LG-R01 |
| Item details | |
|---|---|
| Número de modelo | LG-R01 |
| Nombre del tipo de elemento | Laser Guide |
| Descripción de garantía del fabricante | Oshlun guarantees all of our products against defects in material and workmanship for the life of the product. This does not include normal wear and tear or improper usage. |
| Otros | |
|---|---|
| Otras características especiales del producto | Improved laser design, Slimmer profile, Enhanced laser accuracy, Extra battery set |
| Tipo de producto | Laser Guide |
| Etiquetas | |
|---|---|
| Etiquetas | |