CONFAST 1/4" x 1-1/4" Concrete Screws 410 Stainless Steel Hex with Concrete Drill Bit for Anchoring to Masonry, Block or Brick (50 per Box)
- BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost
- HEX HEAD--Can be driven with Hex Driver
- SELF-TAPPING-Taps threads directly into masonry and requires no other anchor
- DIAMOND POINT-Easier to drive the screw to save time
Estimated shipping
Select a product to estimate shipping.Applications
The anchor is made from 410 Stainless Steel, and is Silver Climaseal Coated. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Head Style
The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached.
Hole Diameter/Bit Diameter
The anchor requires a 3/16" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A 5/16" nut driver is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 1/4".
Length Anchor
The length of the anchor is 1-1/4"
Thread Length
The length of the threads on the anchor is 1-1/4" in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1/4". This will ensure that the minimum embedment of 1" will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 5/16".
Spacing between Anchors
Each anchor must be spaced a minimum distance of 4" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 3" from an unsupported edge of the concrete.
Especificaciones
| Main Specification | |
|---|---|
| Fabricantes | CONFAST |
| Cuenta de unidad | Cuenta 50 |
| Tema Dimensiones L x W x H | 3.5 x 3 x 3 inches |
| Acabado exterior | Silver Ruspert |
| Tipo de metal | Acero inoxidable |
| Estilo de cabeza | Hex Washer |
| Thread Coverage | Partially Threaded |
| Diámetro exterior | 0,25 pulgadas |
| Marca | Confast |
| Tipo de cabeza | Hex |
| UPC | 820274004555 |
| Número de artículos | 50 |
| Fastener Tipo | self-tapping-taps |
| Diámetro del elemento | 0,25 pulgadas |
| Número de piezas | 50 |
| Tamaño fácil | 1/4 pulgada |
| Tamaño del pan | 1/4 pulgada |
| Material | Acero inoxidable |
| Color | Azul |
| Sistema de transmisión | Hex externo |
| Peso del artículo | 0,35 kg |
| Product information | |
|---|---|
| Nombre | CONFAST 1/4" x 1-1/4" Concrete Screw Set (50 pieces) |
| Technical Details | |
|---|---|
| Número de la parte | CSHS14114 |
| Modelo | CSHS14114 |
| Tipo de material | Acero inoxidable |
| Thread Style | Mano derecha |
| Diámetro de Groove compatible | 0,25 pulgadas |
| Tipo de pan de tornillo | Unified National Coarse (UNC) |
| Style | |
|---|---|
| Tipos de acabado | Silver Climaseal Coated |
| Measurements | |
|---|---|
| Tema Dimensiones | 3.5 x 3 x 3 inches |
| Otros | |
|---|---|
| Tipo de producto | Concrete Screws |
| Nombre del tamaño | 1/4" x 1-1/4" |
| Estilo de la cabeza del tornillo | Hex Washer |
| Estilo de punto de tornillo | diamond point-easier |
| Etiquetas | |
|---|---|
| Etiquetas | |