S&F STEAD & FAST Mag Drill Bit 15/16" x 1" Depth, Pilot Pin, Annular Cutter
- Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
- HSS annular drill bit with Outside Diameter 15/16 inch with 1 inch cutting depth
- CNC-machined high precision drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
- IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.
- Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.
- Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.
- Compatible with various brands of mag drill including Alfra, BDS, Dewalt, Fein, Euroboor, Hougen, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is not included in this pack
- Sturdy plastic case holding one annular cutter, one pilot pin
- Multiple piece sets of this size annular cutter are available in our store
Estimated shipping
Select a product to estimate shipping.The S&F Stead & Fast Annular Cutter is a precision tool designed for creating clean, smooth holes in metal. Crafted from durable M2AL high-speed steel, this cutter delivers consistent performance and longevity for demanding industrial applications.
Key Highlights
- Precise Cutting: CNC-machined for accuracy and delivers smooth, reamed edges with minimal burring.
- Durable Construction: Made with M2AL high-speed steel (HSS) for exceptional wear resistance and a long service life.
- Secure Clamping: Features a 3/4" Weldon shank with 2 flats, ensuring a firm and stable connection to your magnetic drill press.
- Pilot Pin Included: A pilot pin helps guide the cutter for accurate hole placement.
- Efficient Drilling: Optimized cutting angle (118 degrees) for efficient material removal.
Useful Facts
- Material: High Speed Steel (HSS)
- Cutting Diameter: 0.94 inches (24mm)
- Shank Type: Weldon (3/4" with 2 flats)
- Brand: S&F STEAD & FAST
- Model: ZXT-HAZ-012
Good Fit For
- Industrial machining operations
- Metalworking projects
- Use with magnetic drill presses
- Applications requiring clean, precise hole creation
Product details
Especificacions
| Main Specification | |
|---|---|
| Fabricant | S+FADE & ràpid |
| Comptador d' unitats | 1 Compte |
| Recomanació de superfície | Metall |
| Slit Diametre | 0, 94 polzades |
| Estil del punt | Punt Pilot |
| Tipus de Shank | Weldoitalyprovince. kgm |
| Tipus de Flauta d' eina | Espiral |
| Marca | S+FADE & ràpid |
| Cadena d' angle de retall | 118 graus |
| Components inclosos | Pilot Pin |
| Nombre de peces | 3 |
| Material | Alta velocitat Steel (HSS) |
| Tipus d' acabat | Sense codificar |
| Pes de l' element | 4, unces |
| Technical Details | |
|---|---|
| Número de " part " | ZXT-HAZ-012 |
| Model | ZXT-HAZ-012 |
| Tipus de material | Alta velocitat Steel (HSS) |
| Nombre de Flates | 1 |
| Style | |
|---|---|
| Tipus d' acabat | Sense codificar |
| Measurements | |
|---|---|
| Dimensions de l' element | 2.44 x 0.94 x 2.44 inches |
| Altres | |
|---|---|
| Ressaltat de l' element | Industrial Grade, CNC-Machined, 3/4" Weldon Shank, Precise Smooth Cuts, M2AL HSS Annular Bit for Magnetic Drill Press |
| Tipus de producte | Annular Cutters |
| Mínim Bore Diametre | 0, 75 polzades |
| Etiquetes | |
|---|---|
| Etiquetes | |