S&F STEAD & FAST Mag Drill Bit 15/16" x 1" Depth, Pilot Pin, Annular Cutter
- Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
- HSS annular drill bit with Outside Diameter 15/16 inch with 1 inch cutting depth
- CNC-machined high precision drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
- IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.
- Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.
- Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.
- Compatible with various brands of mag drill including Alfra, BDS, Dewalt, Fein, Euroboor, Hougen, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is not included in this pack
- Sturdy plastic case holding one annular cutter, one pilot pin
- Multiple piece sets of this size annular cutter are available in our store
Estimated shipping
Select a product to estimate shipping.The S&F Stead & Fast Annular Cutter is a precision tool designed for creating clean, smooth holes in metal. Crafted from durable M2AL high-speed steel, this cutter delivers consistent performance and longevity for demanding industrial applications.
Key Highlights
- Precise Cutting: CNC-machined for accuracy and delivers smooth, reamed edges with minimal burring.
- Durable Construction: Made with M2AL high-speed steel (HSS) for exceptional wear resistance and a long service life.
- Secure Clamping: Features a 3/4" Weldon shank with 2 flats, ensuring a firm and stable connection to your magnetic drill press.
- Pilot Pin Included: A pilot pin helps guide the cutter for accurate hole placement.
- Efficient Drilling: Optimized cutting angle (118 degrees) for efficient material removal.
Useful Facts
- Material: High Speed Steel (HSS)
- Cutting Diameter: 0.94 inches (24mm)
- Shank Type: Weldon (3/4" with 2 flats)
- Brand: S&F STEAD & FAST
- Model: ZXT-HAZ-012
Good Fit For
- Industrial machining operations
- Metalworking projects
- Use with magnetic drill presses
- Applications requiring clean, precise hole creation
Product details
Especificaciones
| Main Specification | |
|---|---|
| Fabricantes | SplF STEAD " FAST |
| Cuenta de unidad | 1 Cuenta |
| Recomendación sobre la superficie | Metal |
| Diámetro de corte | 0.94 inches |
| Estilo de punto | Pilot Point |
| Tipo de Shank | Weldon |
| Tipo de fluido de la herramienta | Spiral |
| Marca | SplF STEAD " FAST |
| Cortar la cuerda del ángulo | 118 grados |
| Componentes incluidos | Pilot Pin |
| Número de piezas | 3 |
| Material | Acero de alta velocidad (HSS) |
| Tipo de acabado | Uncoated |
| Peso del artículo | 4.1 onzas |
| Technical Details | |
|---|---|
| Número de la parte | ZXT-HAZ-012 |
| Modelo | ZXT-HAZ-012 |
| Tipo de material | Acero de alta velocidad (HSS) |
| Número de fluidos | 1 |
| Style | |
|---|---|
| Tipos de acabado | Uncoated |
| Measurements | |
|---|---|
| Tema Dimensiones | 2.44 x 0.94 x 2.44 inches |
| Otros | |
|---|---|
| Tema | Industrial Grade, CNC-Machined, 3/4" Weldon Shank, Precise Smooth Cuts, M2AL HSS Annular Bit for Magnetic Drill Press |
| Tipo de producto | Annular Cutters |
| Diámetro mínimo de bore | 0,75 pulgadas |
| Etiquetas | |
|---|---|
| Etiquetas | |